User's Guide

Installation Guide20

Step 5:

Position adapter and align mounting plate.

Remove the tape from the key hole, and use your

key to turn your deadbolt to the fully unlocked position.

If your lock was not in the Compatibility Chart, select the

adapter that ﬁts your tail piece. To do this, slide each

adapter onto the tail piece. The correct adapter will have

the small nub pointing up.

Place the correct adapter onto the tail piece with

the small nub pointing up. Tighten the screws until they

are moderately tight. Do not over-tighten. Over-tighten-

ing can deform the mounting plate and interfere with the

operation of the lock.