Owner's Manual
Table Of Contents
- Getting Started
- Installation Guide
- Introduction
- Preparation
- Supplied Accessories
- Installation Overview
- Step 1: Prepare Existing Deadbolt
- Step 2: Remove your Existing Thumb-Latch
- Step 3: Select the Correct Mounting Plate and Adapter
- Step 4: Position the Mounting Plate
- Step 5: Position Adapter and Align Mounting Plate
- Step 6: Attach the August Smart Lock
- Step 7: Remove Battery Tab
- Step 8: Install Auguust App
- Questions?
- Warranty
Step
6:
Attach
the
August Smart Lock.
fl
Insert
the
adapter into
the
back
of
the
August Smart
Lock, then position the August Smart Lock with
the
curved notch at
the
top.
0 Pull
out
both side wing latches.
Slide the August
Smart Lock
over
tail piece and attach
to
mounting plate.
Make
sure the back
of
the
lock
is
flush
with the door.
(9
To
secure
the
August Smart Lock, clamp
down
both
side wing latches
to
the
mounting plate completely.
If the latches are difficult
to
clamp down, then
go
back
to Step 5C and ensure that
the
screws have
not been
over-tightened.
You
may
need
to
loosen them slightly.