Warranty

Terms & Conditions
Compliance
FCC INTERFERENCE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct
the interference by one of the following
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate this equipment.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
Radiation Exposure Statement: This equipment complies with FCC
radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
August Smart Lock
INDUSTRY CANADA COMPLIANT
This Class A digital apparatus complies with Canadian ICES-003.Changes
or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation
of the device.
INDUSTRIE CANADA CONFORME
Cette classe A appareil numérique conforme à la norme NMB-003.
Les changements ou modifications non expressément approuvés par
la partie responsable de la conformité pourraient annuler l’autorité de
l’utilisateur à utiliser l’équipement.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes
: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de
l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
August Connect
INDUSTRY CANADA COMPLIANT
This device complies with RSS-210 of the Industry Canada Rules.
Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your
body.
INDUSTRIE CANADA CONFORME
Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada
applicable aux appareils radio exempts de licence. Son fonctionnement
est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas
produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout
brouillage reçu, y compris un brouillage susceptible de provoquer un
fonctionnement indésirable.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements
IC établies pour un environnement non contrôlé. Cet équipement doit
être installé et utilisé avec un minimum de 20 cm de distance entre la
source de rayonnement et votre corps.
Safety
Risk of explosion and personal injury if batteries are replaced by incorrect
type. Do not open, mutilate, or expose to conducting materials (metal),
moisture, liquid, fire or heat above 54°C (130°F), incinerate, or immerse
in water or liquid of any kind. Do not short circuit. Doing so may cause
batteries to leak or explode, resulting in personal injury. Dispose of spent,
leaking, or damaged batteries according to manufacturer instructions
and local laws. Do not mix battery types. Do not charge alkaline batteries.
Battery life varies with usage. When replacing, remove all spent batteries,
and do not mix old batteries with new. When device is not in use for
extended periods, remove batteries to avoid leakage and store away from
children in a cool, dry place at room temperature.
The August Smart Lock is not an ANSI or BHMA certified door lock and
must be correctly installed and used with a certified door lock that is
operating in good condition. You assume all risk associated with the
suitability, installation and performance of the door lock and other third
party components, hardware, software and services that you select.