Use Instructions

Device Pairing
Automatic Pairing
GA1000 Series
The Display Unit automatically detects and connects to the Combo Sensor Module in the same
starter kit. Press the "PAIR" button on the MAIN screen to force the system pairing when the
connection is not established automatically.
GA2000 Series
The Receiver/Transponder automatically detects and connects to the Combo Sensor Module in
the same starter kit only when the connection between the Display Unit and the
Receiver/Transponder has been established first.
Manual Pairing
Follow the below instructions to manually setup pairing.
Step 1: Turn on the Display Unit.
Step 2: In the Setting menu, select “PAIRING”. (for GA1000 Series)
In the Setting menu, select “PAIRING” → “COMBO SENSOR MODULE”. (for GA2000
Series)
Step 3: Scan the QR Code or key in the serial number located on the back of the Aulisa X Box.
Step 4: Check if the serial number (SN) displayed matches with the one on the Aulisa X Box.
Step 5: Press “CONFIRM” on the Display Unit.
Step 6: Assemble the Combo Sensor Module and position on to the body to power on the
device.
Step 7: To confirm that the process as successful, ensure that the Bluetooth connection status
on the MAIN screen of the Display Unit is lit blue.
NOTE: The Combo Sensor Module must be placed within 32.8 feet (10 meters) to the
Display Unit (for GA1000 Series), or to the Receiver/Transponder (for GA2000 Series).
NOTE: The Bluetooth connection status icon will turn blue once the pairing succeeds.
NOTE: Up to two (2) Combo Sensor Modules can be stored on the Display Unit.