Use Instructions

For additional troubleshooting, refer to the system Instructions for Use.
If these solutions do not correct the problem, please contact your distributor, or contact Aulisa
by going online at www.aulisa.com under "Contact Us".
Pulse Rate readings
source.
2. Position the Aulisa Oximeter Sensor(s)to a
different site.
3. Make sure the Aulisa Oximeter Module is
attached to the wrist and finger securely.
4. Check the sensor probe for any visible signs
of deterioration.
5. Reduce motion of person being monitored.
“---“ appears on the vital sign
displays
1. Make sure the Aulisa Oximeter Module is
attached to the wrist and finger securely.
2. Reposition the Aulisa Oximeter Sensor(s)
and keep it motionless for at least 10
seconds.
3. Position the Aulisa Oximeter Sensor(s) to a
different site.
4. Make sure the Aulisa Oximeter Module is
within 32.8 feet (10 meters) spherical
radius to the Aulisa Digital Vital Sign
Monitoring System.
5. Verify the system connection with the
Aulisa Digital Vital Sign Monitoring System.
Data update period has
exceeded the limit
1. Reposition the Aulisa Oximeter Sensor(s)
and keep it motionless for at least 10
seconds.
2. Position the Aulisa Oximeter Sensor(s) to a
different site.
Cannot establish
system connection
1. Make sure the device is within 32.8 feet (10
meters) to the Aulisa Digital Vital Sign
Monitoring System.
2. Power off the Aulisa Digital Vital Sign
Monitoring System and retry.
CAUTION!!! This system is a precision electronic instrument and must be repaired by
knowledgeable and specially trained Aulisa personnel only. Do not attempt to open the
case other than the battery cover or repair the electronics.