Use Instructions

Welcome
This manual will help you get started with monitoring using the Aulisa Oximeter Module of
Guardian Angel® Rx Digital Vital Sign Monitoring System (herein referred to as Aulisa Digital Vital
Sign Monitoring System). The Aulisa Oximeter Module is intended for use with Aulisa Digital
Vital Sign Monitoring System. Refer to the system Instructions for Use for detailed instructions.
Contraindications
1. Do not use any part of this device in an MRI environment.
2. Explosion Hazard: Do not use this device in an explosive atmosphere or in the presence of
flammable anesthetics or gases.
3. This device is not a replaceable for a caregiver.
Warnings
1. This device is intended only as an adjunct in patient assessment. It must be used in
conjunction with other methods of assessing clinical signs and symptoms.
2. A functional tester cannot be used to assess the accuracy of this device. This device does
not require calibration.
3. This device readings may be affected by the use of an electrosurgical unit.
4. Anemia may affect the accuracy of the measurement.
5. As with all medical equipment, carefully route all cables to reduce the possibility of
entanglement, strangulation or injury to the patient.
6. Be careful with small parts that can be removed from the device and swallowed. They are
hazardous to children.
7. Excessive pressure to the sensor application site for prolonged periods may cause damage
to the skin beneath the sensor.
8. Do not use this device if it is damaged in any way. Discontinue using it immediately and
replace with a new one.
9. Do not use in or around water or any other liquid when AC power adaptor is used.
10. Only use this device with charging adaptors provided by Aulisa.
11. The Adult/Pediatric Disposable Oximeter Sensor Cable is for single use only.
12. This device is designed to determine functional oxygen saturation, the percentage of
arterial oxygen saturation of functional hemoglobin. Significant levels of dysfunctional