Operation Manual
18
Funktionen
Einstellen der Uhrzeit
• Set the unit into standby mode ( ).
• Press MEM/CLK ADJ. „SET CLOCK“ and „24hr“ will be displayed. Use / to change the time
format (12h/24h).
• Press MEM/CLK ADJ, To set the time. First, set the hour using / . Then save with MEM/CLK ADJ
and repeat for setting the minutes. Save changes with MEM/CLK.
Please note:
1. The clock setting mode will automatically quit if no button is being pressed in a period of about 10
seconds after pressing the “ Mem/Clk-adj ” button.
2. After disconnecting the unit from power supply, time has to be set again.
Radio
Sender einstellen und speichern
• Press FUNCTION repeatedly to choose FM mode.
• Use / to manually search for stations or (press and hold) for an automatic scan.
• Save the currently playing station to one of 20 available presets by pressing MEM and then choosing
the desired position using / . Press MEM, again, to conrm.
You can use to directly go to preset menu.
Please note:
1. All preset stations will be deleted, when the unit is disconnected from power supply.
2. The unit changes back to play mode after 5 seconds without any changes.
3. Pre-set stations will be overwritten without checkback.
Stereo/Mono
Press ST/MONO repeatedly. In particular when stereo signals are weak, it might be preferable to receive
the program in mono.