Operation Manual

20
BT
• Press FUNCTION repeatedly to choose BT mode.
• Activate BT on your mobile device and connect with MCD-107C. The display shows „BT“ on successfull
connection attempt.
• Use , / and . to navigate through your mobile music library, or use the external device,
alternatively.
• Press and hold to disconnect, if you want to pair with another BT device.
Sleep Timer / Timer
• Press SLEEP (on the RC) repeatedly to set the desired sleep time (90 ... 80 ... 70 ... ... 10mins ... o). After
the set time the device will switch to standby.
• You can set the Timer to make the unit switch on and play music automatically at a chosen time (and,
as well, switch to standby at another adjustable time).
• Switch to standby.
• Press and hold TIMER (RC) to activate the timer function.
• Adjust the desired time for ON TIMER (procedure analogue to setting the clock; except: conrm
pressing TIMER) and set the WAKE UP volume with the VOL+/- buttons.
• Choose the music source (USB/SD/Radio/CD) pressing FUNCTION repeatedly.
• Conrm and save changes by pressing TIMER.
• Repeat the procedure for OFF TIMER (time the device is meant to switch to standby).
• After the changes, the unit switches back to standby.
• Press TIMER to activate / deactivate the timer function.
Please note:
• If there is no music source being detected (such as USB or CD) when the preset time is reached,
system will default to tuner for wake up mode automatically. The system will tune in the latest
radio frequency being listened to before being switched o
• For tuner wake up, the system will tune in the latest radio frequency being listened before being
switched o.
• The system will return to standby mode automatically if no keys being pressed for 5 seconds.
Additional Functions
Light eects: This unit provides 8 dierences lighting eects. You can select the desired eect by pressing
the LIGHT button (RC) repeatedly.
EQ: Press EQ (RC) repeatedly to choose from ve pre-set EQ settings (FLAT - CLASSIC - ROCK - POP - JAZZ).