Operation Manual

Connections and Wiring

Wiring Diagram

Cautions

• The said product is powered by means of a 12VAC accumulator which is grounded via the negative electrode;

• Please connect as per the wiring diagram so as to avoid any device damage;

• Before connection, strip o the insulation layer long as 5mm on both ends of the wires;

• Do not power on until connection is nished;

• Insulate any exposed live part in order to prevent short-circuit with the automobile chassis. Bundle all the wires

and cables so as to prevent any terminals making contact with any metal object;

• Important: As for any automobile equipped with computer or satellite navigation system,

Attention when connecting speakers:

• Do not use any grounded speakers;

• The power of the speaker in use must exceed 40W as it is required to accept maximum output power of the

amplier;

• The speaker has resistance ranging between 4~8ohm. Any resistance not covered by such range could aect

output power and even damage the speaker or the said product;

• The speaker wires should be approximately 30mm away from the antenna and antenna extension cable; Please

follow the diagrams below to connect correctly so as to safeguard either the speaker

• or the said product:

http://www.auna-multimedia.com

multimedia