Operation Manual

14
Installation and Connection
Before rst Use
• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the main voltage and before all other connec-
tions have been made.
• Do not cover any vents and make sure that there is a space of several centimeters around the unit
for ventilation.
For Table Top Use
Inset the stand to the main unit and speaker box refer to the picture
For Wall Mounting
1 Uninstall speaker box and the stand in the revise way from above.
2 Use the wall-mounting template supplied with the unit to make anchor hole marks on the wall.
Make sure the marks are level.
3 Drill 1/4” holes on the marks.
4 Insert the plastic anchor supplied with unit it is ush with the wall.
5 Insert the screw and tighten the screw 4mm away from the wall. (Approximately the width of 2
pennies) hang the main unit and speakers to the screw.