Use and Care Manual
THE MACHINE MUST BE SWITCHED ON BEFORE ADDING THE ICE CREAM,
OTHERWISE THE MIX MAY FREEZE ON THE INSIDE OF THE BOWL AND DAMAGE
THE MIXING PADDLE.
DO NOT RETURN TO RETAILER
For missing or damaged parts, contact Triple Scoop
Customer service at www.triple-scoop.com or
Toll Free at 844-273-6677
Please have Model Number and Serial Number available when calling
Important
Do not stop and start the machine during the freezing process, as the mixture may freeze in
contact with the bowl and prevent movement of the paddle.
To avoid overheating the motor, the direction of rotation will change if the mixture becomes too
thick. If the direction of rotation continues to change, the mix is complete and you can stop the
machine.
In the unlikely event of the motor overheating, a safety cutoff will operate causing the motor to
stop. If this happens, switch off, unplug the machine and allow the power unit to cool.
The ice cream produced should be a soft spoonable type. This can be transferred to a separate
container for storage in the freezer or if you wish to firm the ice cream before eating.
Do not use metal utensils to remove mix from the bowl. Doing so will damage bowl. Use a stiff
rubber or plastic spoon or spatula to remove the mix.
Tips
Always make sure the freezer bowl is thoroughly dry before placing in the freezer.
Do not remove the freezer bowl from the freezer until ready to make ice cream.
We suggest that you keep the freezer bowl in the freezer so that it is always ready for use.
Freeze the bowl in the upright position.
Do not puncture or heat the freezer bowl.
For best results always refrigerate the ingredients before making ice cream.
Cleaning
Always switch power off, unplug and dismantle before cleaning.
Never put the power unit in water or let the cord or plug get wet.
Do not wash parts in the dishwasher.
Do not clean with scouring powders, steel wool pads, or other abrasive materials, doing so will
damage bowl.
Freezer Bowl
Allow the freezer bowl to reach room temperature before attempting to clean.
Wash the inside of the bowl, then dry thoroughly. Do not immerse in water.
Paddle
Remove the paddle from the power unit.
Wash then dry thoroughly.
Lid
Remove power unit from Lid, then wash the lid and dry thoroughly.