Contact Us: service@anmytek.
Item No. : H0052 Contact Us : service@anmytek.com PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING AND USING THE PRODUCT. 1. Please check that all parts are present, need Phillips head screwdriver (not included) before you start the assembly of your furniture. 2. For ease and speed of assembly, we recommend that before you commence each step of the assembly, that you identify all the parts required for that step. 3.
Item No. : H0052 Contact Us : service@anmytek.com If you have any general enquiries or require spare parts for this product, please feel free to contact us via the following email: Email: service@anmytek.com You can contact us for support at any time. We'll answer you in 24hrs. Contact Us : service@anmytek.
TIPS Before ASSEMBLY IMPORTANT: 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping. What you need • • Some of your favourite fruits or your preferred snacks. Use the packaging carton as a working surface to prevent possible product damage during assembly.
Item No. : H0052 Contact Us : service@anmytek.com Contact Us : service@anmytek.
Item No. : H0052 Contact Us : service@anmytek.com Contact Us : service@anmytek.
Item No. : H0052 Contact Us : service@anmytek.com Contact Us : service@anmytek.
Item No. : H0052 Contact Us : service@anmytek.com Secure parts 11 and parts 12 assembled unit using screws (a), as shown. Contact Us : service@anmytek.
Item No. : H0052 Contact Us : service@anmytek.com 8 9 Contact Us : service@anmytek.
Item No. : H0052 Contact Us : service@anmytek.com 10 11 Contact Us : service@anmytek.
Item No. : H0052 Contact Us : service@anmytek.com 12 Contact Us : service@anmytek.
Item No. : H0052 Contact Us : service@anmytek.com 13 Contact Us : service@anmytek.
Item No. : H0052 Contact Us : service@anmytek.com NOTE: Supplied wall plugs are only suitable for use in masonry walls. If you have any doubts about using the correct plug for your wall, please seek professional advice. Failure of the product due to using incorrect fixings is the responsibility of the installer. IMPORTANT: When drilling into walls, always check for hidden wires or pipes, etc. Tips & Tricks Make sure that the hardware used is suitable for supporting your unit.