User Manual

The touchscreen Dialer can be accessed by touching the Dialer shortcut.
The Dialer is automatically launched when the Tablet is placed on the dock. When the Tablet’s dock interface comes into
contact with the dock connector, the keypad on the dock is automatically disabled.
With this set-up, you must use the Tablet dialler to make calls.
Please take note of the following when using the Dialer:
Line 1- Landline
Line 2- VoIP (requires network support)
When the Tablet is docked, the handset keypad and the speaker button are automatically disabled. The user must use
the Tablet for dialing.
The Tablet’s touchscreen Dialer is used as the primary phone. The handset provided serves as a secondary phone so users
can make calls if there is a power outage or when the Tablet is removed from the dock.
4.1.1.1 Making a call without the Tablet
You can use the handset base like an ordinary xed phone to make calls when the Tablet is removed from the dock.
4.1.1.2 Making a call using the onscreen Dialer
1. Lift the handset from the dock.
2. Dial the number using the onscreen dialer.
3. To end the call, return the handset to the dock.
4.1.1.3 Making a call on the speakerphone using the onscreen Dialer
1. Touch to enable the speakerphone.
2.Dial the number using the onscreen dialer.
3. Touch to end the call.
4.1.1 Making a call
4.1 VOICE SERVICES
68