User's Manual
3.20.2 IR Learning
-If you want customized remote, please select “Customize” when selecting Brand.
-Once installed, it will show learning function interface. Each button have to be assigned a signal with IR Learning
process by touching it until tapping “Finish” button.
-From the main menu tap “add Remote control” Select Device Select Brand * Select Model Conrm if signal is
working** Save remote with “Remote Name ” Select Zone and tap save Tap selected Zone tap saved “Remote
Name” you can nd installed IR remote UI.
*If your device is made by top ranked brands, then check “Show most common models only” option. This will lter out
minor provider. There are two search methods available, standard and model search ow. Please use default standard
search ow if you are rst time to setup. If you want model search ,check “Model Search” option, you can search the code
with input model name.
- Standard search ow : Optimized and intelligent algorithm to nd the right code. User just tap the displayed button and
select “Correct” if it is works. If this process fails, it will automatically forward to Model search ow.
- Model search ow : User need to input at least 2 characters for model name of the device, and tap . User gets the
count of available codes (Interrelated device) for this brand . By using and preview command button, it will be able
to traverse all codes for user to identify the right code. If the model name is incorrect or leaved blank, it will show all
available code for the brand.
**When conrm signals, please point the Red part of TELPAD towards the device you are trying to control just like a
standard remote control.
42