Congratulations! You now have a higher quality recording and listening environment.
The MAX-Wall Instruction Sheet Thank you for purchasing your MAX-Wall™ Modular Acoustical Environment. This modular, absorptive, expandable acoustical kit is ideal for situations where you cannot permanently place Studiofoam™ on your room surfaces. It’s also great when you need to be able to quickly and easily change your recording/listening environment for a variety of situations. The MAX-Wall offers you a great deal of flexibility, is easy to setup, and can be easily expanded.
End Cap Third. Locking panels together: Figure 2 The ends of each panel are designed to “peel” away (see figure 2), allowing the panels to be locked together. This creates a continuous acoustical wall. Panels can then be hinged up to 60°. When removing these pieces, we suggest labeling both the panel and the end cap in a location that will be concealed once connected. This will allow you to replace the end caps without them being mismatched.
2” Studiofoam™ Wedges Wedges • Our incredibly popular LENRD in a 4’ standmounted version! • Terrific when used in conjunction with our MAX-Wall™ system. (see back page) • Great for applications where permanent installation is not possible. • Easy mobility allows you to “tune” the room for different uses. Stand-Mounted LENRD™ • They’re the workhorse of the industry & the most 1” Studiofoam™ popular method to Wedges eliminate annoying standing waves for truer sound.