Installation Guide

Copyright 2003 Auralog S.A. All rights reserved. 31
TELL ME MORE
®
Education
Installation Guide
AUXILIARY LESSON SERVER
This application allows you to copy the lessons from the main server or CD-ROM onto an auxiliary lesson server, in
order to share the lessons accessible through the network among different machines. This application requires special
installation procedures. To know more about this, refer to the To install the Auxiliary Lesson Server application
section.
Caution!
This application cannot be used under the terms of a single workstation licence.
To install the Auxiliary Lesson Server application
Caution!
Check the TELL ME MORE Server is running before installing. To know more about this, refer to the To start the
TELL ME MORE Server section.
Note:
It is possible to install several Auxiliary Lesson Server applications on the same workstation. This is useful when
installing several auxiliary lesson servers on non-Windows
®
servers.
1. Insert the Installation CD-ROM into the CD-ROM drive. The installation executable (AuxServer.exe) can be
found in the directory AurTech\AuxServer on the root directory of the CD-ROM.
2. Click on Next on the welcome page.
3. Confirm or modify the TELL ME MORE
®
Education server name and the port number, then click on Next.