Installation Guide

Copyright 2003 Auralog S.A. All rights reserved. 34
TELL ME MORE
®
Education
Installation Guide
Caution!
The disk space required (in MB) to copy the source directory is approximate. This figure may vary depending on the
partition of the hard disk on which you copy the lesson content.
Ø Select the directory into which you want to copy the lessons. The directory defined during installation is proposed
by default. If you want to copy the lessons into another directory, you must first create it and share it with complete
access (example : \\courseserver\courses\…).
Caution!
All lessons in the same language must be copied into the same directory, which must be accessible through a shared
network path with complete access.
To obtain a detailed description of the lessons in a Lesson Family, double-click on the corresponding line.
From the main server
This function allows the entire lesson content to be copied from the main server onto the auxiliary lesson server.
Caution!
This copy will delete all existing lessons on the auxiliary lesson server.
Select the menu Lessons/Copy the main server content.
The existing lessons on the auxiliary lesson server are deleted to enable the main server lesson content to be copied onto
it.
Confirm by clicking on the green tick.
To remove lessons
Note:
You can only remove the whole lesson content of a language.
Ø Select the lesson language you want to remove from the drop-down menu.
Ø Click on the icon Remove lesson language
.
A message will appear asking you to confirm this choice. Click on the green tick to confirm the removal of the lesson
language.