User's Manual

Last update: 31/03/04
TELL ME MORE
®
User Manual 4
Note:
You may listen to the sound output either via loudspeakers or headphones. You must, therefore,
connect either the ²
²²
² plug of the headset or the plug of the loudspeakers to the sound card input.
☛ Testing the sound card
Use the Windows
®
Sound recorder:
Go to the Start\Programs\Accessories\Multimedia (or Entertainment)\Sound recorder menu.
Start recording by clicking on the red circle.
Stop recording by clicking on the black rectangle.
Listen to your recording by clicking on the arrow.
If your sound card is correctly installed, the playback of your recording will be clear. If not, contact
your supplier for more information.
2.3 Installing TELL ME MORE
®
4 Insert the CD-ROM/DVD-ROM into your CD-ROM/DVD-ROM drive. The installation process
will begin automatically after a few seconds. If this does not occur, double-click on Setup.exe
located in the AurInst directory, which can be found on the root directory of the CD-ROM/DVD-
ROM.
Note:
For Windows
®
NT, 2000 and XP, the administrative rights must be obtained prior to installation
of TELL ME MORE
®
. Once installed, TELL ME MORE
®
can be used without the administrative
rights.
4 The installation program will ask you to select the language used to give instructions during the
installation of TELL ME MORE
®
.
4 Carefully read the Licence Agreement. If you accept the terms, click on Yes and then on Next.
Note:
If you click on No, the installation process will be interrupted.
4The program will indicate the disk space required to install TELL ME MORE
®
on your hard
drive, as well as the available remaining disk space.
4The installation program will ask you on which disk you wish to copy the files necessary for
using TELL ME MORE
®
.
C:\Program Files\Auralog\TELL ME MORE SI PLUS is proposed by default. Click on Install to
start the TELL ME MORE
®
installation process.
Note:
For certain TELL ME MORE
®
packages, the installation process and the lesson content are
stored on two separate disks. In this case, the installation process must first be completed using