Technical Support Manual

Auralog Inc. 3710 E. University Drive Phoenix AZ 85034 888.388.3535
Speech Recognition Troubleshooting Tips
Check microphone using Microsoft’s sound recorder
START>ALL
PROGRAMS>ACCESSORIES>ENTERTAINMENT>SOUND
RECORDER
Click on red record button and speak into microphone. The green line
should change wavelengths as it picks up sound.
If the green line remains unchanged as you speek into the microphone
you need to check and make sure you are plugged into the correct
microphone input on your computer. Sometimes, it may look like it is
plugged in but it is not completely plugged in. Firmly push it into its input.
Below are a few examples of a typical microphone input. Notice the
microphone icon to the left of the input to help you identify the correct
input. After checking this try the sound recorder again.