RF-PBO-16 Premium Reflection Filter Owner’s Manual RF-PBO-16 Owner’s Manual 1
Thank you for choosing Auray. The Auray RF-PBO-16 Premium Reflection Filter provides music producers, broadcasters, and podcasters with advanced microphone isolation. When recording vocals, voiceovers, or podcasts in a studio or acoustically untreated space, the RF-PBO-16 creates a dry and close sound for clean vocal tracks. This reflection filter is designed with multilayered protection that absorbs unwanted ambient noise and controls acoustic reflections that can compromise your recording or broadcast.
Overview Reflection filter 1 Locking screws (×2) 2 L bracket 3 Threaded thumbscrews (×2) 4 Extender 5 Star nut 6 2 1 3 4 6 5 RF-PBO-16 Owner’s Manual 3
Instructions Vertical Setup 4 1. If the L bracket is not attached to the filter: Align the slot on the flat side of the L bracket with the screw holes on the back of the filter. Tighten the two locking screws until secure. 1 2. Screw one of the thumbscrews onto the threaded post of the mic stand. 2 3. Place the thumbscrew’s threaded post through the slot on the L bracket. 3 4. Attach the second thumbscrew to the first thumbscrew to secure the filter. Tighten until secure. 3 5.
Inverted Setup RF-PBO-16 1. If the L bracket is not attached to the filter: Align the slot on the flat side of the L bracket with the screw holes on the back of the filter. Tighten the two locking screws until secure. 2. Screw one of the thumbscrews onto the threaded post of the mic mount on your mic boom. 5 3. Invert the filter, and place the thumbscrew’s threaded post through the slot on the L bracket. 6 4. Attach the second thumbscrew to the first thumbscrew to secure the filter.
Adjusting the Microphone Position To center the microphone capsule vertically: 1. Support the reflection filter from below with one hand, and loosen the two locking screws. 9 2. Adjust the height of the shield relative to the microphone, and retighten the locking screws. 10 To adjust the distance of the microphone from the filter: 6 1. Loosen the bottom thumbscrew 11 , and slide the extender and microphone along the L-bracket slot. 12 2.
Specifications Material: Outer: ABS plastic shield Inner: High-density open-cell acoustic foam layer , double wool layer Shield dimensions (H × W × D): 11.8 × 16.5 × 7.75 in. (30 × 42 × 19.7 cm) Extender height: 3.5 in. (9 cm) Weight: 3.5 lb. (1.
One-Year Limited Warranty This Auray product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.