User Manual

6 RF-PBO-16Owner’s Manual
11
12
9
10
Adjusting the Microphone
Position
To center the microphone capsule
vertically:
1. Support the reflection filter
from below with one hand, and
loosen the two locking
screws.
9
2. Adjust the height of the shield
relative to the microphone, and
retighten the locking screws.
10
To adjust the distance of the
microphone from the filter:
1. Loosen the bottom
thumbscrew
11
, and slide the
extender and microphone
along the L-bracket slot.
12
2. Once you have placed the
microphone in the correct
position, tighten the top
thumbscrew until secure.