User's Manual

Owner’s Manual4 BA-XE4
Mounting the Arm with the C-clamp
The C-clamp is perfect for nonpermanent mounting on
surfaces up to 2.2 inches thick, such as tabletops, desks, or
workstations.
Caution: For a secure and stable setup,
the desk’s surface and underside should
be flat, and the corners should be square.
Attaching the clamp to a beveled,
curved, or uneven surface can result
in unstable and unsafe installation.
1. Fully open the C-clamp.
2. Place the C-clamp on the edge of a desk so the C-clamp
bracket is flush against the side of the desktop.
3. Secure the C-clamp by tightening the T-handle
until it’s securely fixed to the desktop.
4. Loosen the mounting socket’s locking knob, and
slide the arm’s base stud into the C-clamp’s socket.
5. Position the arm as desired, and tighten the locking
knob to secure the arm’s position. Loosen the locking
knob to swivel the arm or remove it from the mount.
Instructions