User Manual

4 BAE SeriesOwner’s Manual
Instructions
Setting up the BAE-series
broadcast arm using the
C-clamp:
1. Fully open the C-clamp.
1
2. Place the C-clamp on the
edge of the desk so that the
C-clamp bracket is flush against
the side of the desktop.
3. Secure the C-clamp by tightening
the handle until the desktop mount
is securely fixed to the desktop.
2
Caution: For a secure and stable setup, the
desk’s surface and underside should be flat,
and the corners should be square. Attaching
the clamp to a beveled, curved, or uneven
surface can result in unstable and unsafe
installation and cause damage to the desktop.
4. Loosen the insert hole locking
knob and insert the base stud
of the broadcast arm into the
hole of the desktop mount.
3
1
3
2