ERS SERIES Steel Equipment Rack Owner’s Manual
Thank you for choosing Auray. Auray’s equipment racks come in 8-space, 12-space, 16-space, and 22-space configurations. Vented side panels promote airflow throughout the rack. Each model has a maximum weight capacity of 440 lb. They are supported by three-inch casters for easy movement and access to the back of your gear. Precautions • • • • • Please read and follow these instructions, and keep this manual in a safe place. Keep this product away from children.
Overview Top plate 1 1 Side plate (×2) 2 Corner column (×4) 3 10-32 (5 mm) screws and washers, preinstalled 4 2 3 10-32 (5 mm) screws and washers 5 12-24 (6 mm) screws and washers 6 Screwdriver Back plate 7 8 Bottom plate and casters 9 6 mm screw holes 4 ×16 5 ×20 pack 6 5 mm screw holes ×20 pack * Preinstalled into the corner columns 7 8 9 ERS SERIES Owner’s Manual 3
Assembling the Rack 1. Use the 10-32 screws and washers to attach the corner columns and side plates to the bottom plate. Important! Make sure both corner column vents are facing outward or inward, depending on your rack equipment. Installation for 12-24 (6 mm) screws If your rack equipment uses 10-32 screws, face the corner column vent away from the side plate. Use this configuration for audio rack equipment.
2. Remove the four screws and washers from the top of each corner column, and use them to attach the top plate. Use 10-32 screws and washers to fill in the remaining two screw holes in the top plate.
Assembling the Rack (continued) 3. Use 12-24 or 10-32 screws and washers to attach the back plate.
ERS SERIES Owner’s Manual 7
Three-Year Limited Warranty This AURAY product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of three (3) years from the original purchase date or thirty (30) days after replacement, whichever occurs later.
