IPU-108 Universal Tablet Holder Owner’s Manual IPU-108 Owner’s Manual 1
Thank you for choosing Auray. The Auray Universal Tablet Holder mounts your tablet onto a microphone stand’s shaft or threaded mount for hands-free viewing while onstage or in the studio. The adjustable bracket ensures safe and easy support for your tablet. The holder is designed to provide 180° tilt and 360° rotation for optimal landscape or portrait orientation.
Overview Holder Small V-arm extension (7 to 11 in. tablets) 1 Large V-arm extension (10 to 14 in. tablets) 2 V-arm extension locking knob 3 Tilt adjustment locking knob 4 1 5/8 in. threaded socket 5 2 3 4 5 Clamp 5/8 in.
Instructions Mounting the IPU-108 to a Microphone Stand’s Threaded Mount Important! Do not insert your tablet into the bracket until you have successfully mounted the IPU-108 onto the microphone stand. 1 Align the 5/8 in. threaded socket with the microphone stand’s threaded mount, and screw the universal tablet holder on until secure. 1 Adding the Clamp to the Tablet Holder To mount the IPU-108 to a microphone stand shaft, the clamp must first be attached to the tablet holder. 4 1. Align the 5/8 in.
Mounting the IPU-108 to a Microphone-Stand Shaft 1. Loosen the clamp locking knob, and then fit it around the microphone-stand shaft. 2. Close the clamp by tightening the clamp locking knob until secure. 2 2 Selecting or Swapping the V-arm Extensions for Your Tablet 14 in. 11 in. 7 in. 10 in. Small V-arm extensions Large V-arm extensions To attach or swap the V-arm extensions, follow these steps: IPU-108 1.
Inserting Your Tablet into the Bracket Important! Do not insert your tablet into the bracket until you have successfully mounted the IPU-108 onto the microphone stand. 1. With the bracket in a partially vertical position, loosen the bottom V-arm extension locking knob. Slide the extension wide enough to accommodate one corner of the tablet. 3 2. Tighten the bottom V-arm extension locking knob until secure. 3. Loosen the top V-arm extension locking knob, and slide it to a wide position. 4 4.
Positioning the IPU-108 Rotation The Auray Universal Tablet Holder has the ability to rotate a full 360°. Turn the tablet to the desired orientation. The V-arm extension nodes will securely hold the tablet in place. 7 7 Tilt The Auray Universal Tablet Holder has a tilt capacity of 180° whether mounted onto the microphone stand’s threaded mount, or mounted onto the stand’s shaft. 8 8 To adjust the tilt, loosen the tilt adjustment locking knob, and set the tablet at the desired angle.
Three-Year Limited Warranty This Auray product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of three (3) years from the original purchase date or thirty (30) days after replacement, whichever occurs later.
