User Manual

6 LMS-335Owner’s Manual

Important: Make all height and location adjustments before mounting your

monitors onto the stands.

Adjusting the height

1. Loosen the locking knob.

2. Raise or lower the telescoping shaft to the

desired height and insert the locking pin

completely through the holes on both sides

of the shaft.

3. Lower the shaft until it rests on the locking

pin. Tighten the locking knob.

Mounting the monitors

1. Once you’ve set the height of the stand,

you can safely mount the monitor on the

monitor mounting plate.

2. Use the touch-fastener straps to secure the

speaker cables by wrapping them around

the shaft and cable.

Operating Instructions