User Manual

Print on Matte Material
Folding Diagram
DO NOT EDIT OR REVISE ARTWORK
We will not approve any artwork which has been altered by the vendor
FORWARD YOUR PROOFS TO:
mabel.li@asia.bhphotovideo .com
FOR APPROVAL BEFORE
FINAL PRODUCTION.
DO NOT BEGIN PRODUCTION
WITHOUT PRIOR APPROVAL
OF PROOFS!
Wood Style Piano Bench
With Storage Compartment
PBS-FS
Owners Manual
GG2
65 PBS-FSPBS-FS
Owner’s ManualOwner’s Manual
Specifications
This AURAY product is warranted to the original purchaser to be
free from defects in materials and workmanship under normal
consumer use for a period of one (1) year from the original purchase
date or thirty (30) days after replacement, whichever occurs later.
The warranty providers responsibility with respect to this limited
warranty shall be limited solely to repair or replacement, at the
provider’s discretion, of any product that fails during normal use of
this product in its intended manner and in its intended environment.
Inoperability of the
product or part(s) shall be determined by
the warranty provider. If the product has been discontinued, the
warranty provider reserves the right to replace it with a model of
equivalent quality and function.
This warranty does not cover damage or defect caused by misuse,
neglect, accident, alteration, abuse, improper installation or
maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY
PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR
ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURP
OSE. This warranty provides you with
specific legal rights, and you may also have additional rights that
vary from state to state.
To obtain warranty coverage, contact the Auray Customer Service
Department to obtain a return merchandise authorization (“RMA”)
number, and return the defective product to Auray along with the
RMA number and proof of purchase. Shipment of the defective
product is at the purchasers own risk and expense.
For more information or to arrange service, visit www.aurayaudio.com
or call Customer Service at 212-594-2353.
Product warra
nty provided by the Gradus Group.
www.gradusgroup.com
AURAY is a registered trademark of the Gradus Group.
© 2014 Gradus Group LLC. All Rights Reserved.
One-Year Limited Warranty
Height: 19.25" (48.9 cm)
Width: 13.2" (33.5 cm)
Length: 22.5" (57.2 cm)
Weight: 13.95 lbs. (6.33 kg)
Seat dimensions (W x L): 13.2" × 22.5" (33.5 × 57.2 cm)
Storage compartment dimensions
(H × W × L):
3" × 10.2" × 19" (7.6 × 25.9 × 48.3 cm)
Weight Capacity: Up to 250 lbs. (113.4 kg)
!
Warnings
3 42 PBS-FS PBS-FSPBS-FS
Owner’s Manual Owner’s ManualOwner’s Manual
This product has been tilt-stability tested. Auray is not responsible
for injury due to improper use. Bench must be on a level surface
with all four legs touching the surface at the same time.
Please read and follow these instructions, and keep this
manual in a safe place.
Make sure that this product is intact and that there are
no missing parts.
Make sure all parts are secure before using.
All photos are for illustrative purposes only.
Introduction
Thank you for choosing the Auray PBS-FS wood-style
piano bench with storage compartment. This sturdy piano
bench is an elegant accessory for use with a keyboard or
piano. The traditional style features a one-inch leather seat
providing comfort through many hours at the keyboard.
A storage compartment for sheet music and other
accessories is located inside the bench.
Seat
1
Corner brackets
2
Legs (4)
3
Attachment bolts
4
Washers (4)
5
Locking washers (4)
6
Nuts (4)
7
Wrench
8
Overview
1
2
4
6
5
7
8
3
Instructions
Assembling the PBS-FS
1. Place the piano bench on
its side on a stable surface.
Position it so that the
open seat lays flat on the
surface exposing the corner
brackets inside the storage
compartment.
2. Attach each leg to the corner
brackets by aligning the bolt
with the hole and inserting it
through the corner bracket.
1
3. Attach a washer, locking
washer and a nut to the end of
the bolt and tighten them by
hand.
2
4. Once all legs have been
attached, place the bench
in the upright position on a
at surface, and complete
tightening the nuts with the
included wrench.
3
Do not over-tighten the nut.
Over tightening can damage
the piano bench.
3
1
2

Summary of content (6 pages)