RF-C12 Professional Desktop Isolation Filter Owner’s Manual RF-C12 Owner’s Manual 1
Thank you for choosing Auray. The Auray RF-C12 Professional Desktop Isolation Filter provides music producers, broadcasters, and podcasters with a desktop solution for advanced microphone isolation. It’s designed with multilayered acoustic treatment that absorbs unwanted ambient noise and controls acoustic reflections. When recording vocals, voiceovers, or podcasts in acoustically untreated rooms, the RF-C12 helps create clean and dry recordings.
Overview Isolation filter 2 1 Threaded sockets 1 5/8 in. to 3/8 in. adapters (2) 2 Telescoping shaft Threaded mount 3 Locking wheel 4 14 13 Twist lock 5 Stand mount 6 Stand Isolation feet 7 1 12 2 Threaded shaft socket 8 Sliding mic assembly Extender endcap 9 Depth locking wheel 10 Twist lock 11 3 11 4 10 5 9 Extender 12 Locking wheel 13 6 5/8 in.
Instructions Setting up the RF-C12 4 1. Screw the telescoping shaft into the threaded mount of the stand until tight. 1 2. Seat the sliding assembly over the threaded mount, and use one of the 5/8-inch adapters to secure it. 2 3. Remove the extender endcap. 3 2. Then loosen the assembly’s twist lock, and slide the extender through the twist lock. 3 4. Tighten the lock, and replace the endcap. 3 5. Attach the isolation filter to the 3/8-inch threaded mount on the adapter.
Attaching a Microphone 1. If you’re using a handheld-style, attach a mic clip (not included) to the 5/8-inch mic mount. 5 If you’re using a large-diaphragm microphone with a shock-mount, attach the shock mount to the 5/8-inch mic mount, and tighten until secure. 5 2. Use the wheel lock to further secure the shock mount. You may need to loosen the locking wheel so you can position the shock mount and microphone facing toward you. Adjusting Filter and Mic Position Filter Height RF-C12 1.
Microphone Height 1. Support the mic with one hand, and rotate the extender’s twist lock counterclockwise to loosen. 7 2. Adjust the mic height, and tighten the twist-lock until secure. 7 Microphone Depth 1. Support the mic assembly with one hand, and rotate the depth locking wheel clockwise to loosen. 8 2. Slide the assembly to the desired depth. The farther away from the filter, the more room ambience you will record. 3. Rotate the depth locking wheel counterclockwise until secure.
4. Invert the sliding assembly, and place the mount over the filter’s top threaded mount. 5. Use the other 5/8-inch adapter to secure the assembly. 10 6. Attach the clip or shock mount for your microphone. 10 Specifications Material: Composite fiber Molded polymer Isolation Filter Dimensions (H × W × D): 9.1 × 12.2 × 3 in. (23 × 31 × 7.6 cm) Stand Base Dimensions (W × D): 9 × 8.7 in. (22.7 × 22 cm) Stand Base Height Range: 7.25 to 9.1 in. (18.4 to 23 cm) Weight: 3.6 lb. (1.
Three-Year Limited Warranty This Auray product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of three (3) years from the original purchase date or thirty (30) days after replacement, whichever occurs later.
