RF-CM-S Reflection Filter Owner’s Manual
Introduction Thank you for choosing Auray. Congratulations on your purchase of the Auray RF-CM-S Reflection application where microphone isolation is needed. When recording vocals in an acoustically untreated room like a home studio or rehearsal studio, the RF-CM-S Reflection Filter is designed to absorb unwanted ambient noise and control acoustic reflections while improving the quality of vocal recordings.
Overview Shield 1 Rear adjustment bracket 2 Sliding bracket 3 Locking Screws (3) 4 Shock mount adapter (2) 5 Extender 6 1 2 3 4 5 6 RF-CM-S Owner’s Manual 3
Instructions 1 Mounting the RF-CS-S and Microphone to a Mic Stand 1. Attach the rear adjustment bracket to the shield with two locking screws. 1 2. Attach the sliding bracket to the rear adjustment bracket with the remaining locking screw. 2 3. Screw one of the shock mount adapters onto the threaded post of your microphone stand. Then place the opening of the sliding bracket over the shock mount adapter’s threaded post.
Positioning the Microphone 1. Adjust the height of the shield by loosening the two locking screws that are attached to the back of the shield and move the shield to the desired height. 6 6 Caution: do not loosen the locking screw that is attached to the sliding bracket. 2. Adjust the distance of the shield from the microphone by loosening the shock mount adapter and moving the shield to the desired position. 7 7 Specifications Shield Dimensions (W × H × D): 19.
Five-Year Limited Warranty This AURAY product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of five (5) years from the original purchase date or thirty (30) days after replacement, whichever occurs later.
