TMS-135 Studio Monitor Stands (Pair) Owner’s Manual
Introduction Thank you for choosing Auray TMS-135 Studio Monitor Stands. These sturdy monitor stands are ideal for project and home studios alike. Each stand has a top monitor mounting plate measuring 9˝ square and is capable of supporting monitors up to 90 lb. The triangular base features a 17˝ spread offering stability while easily fitting into tight spaces. Adjustable rubber pads and included adjustable leveling spikes ensure steadiness on most types of floor surfaces.
Overview Monitor mounting plate 1 1 Telescoping shaft 2 2 Locking knob 3 3 Locking pin 4 4 Base with rubber feet 5 Shaft mounting plate 6 Socket screws (2) 7 Leveling Spikes (3) 8 Cable guides (2) 9 5 Allen key 10 6 7 8 9 10 TMS-135 Owner’s Manual 3
Assembly Instructions 1. Hold the telescoping shaft vertically with the lock on the top. 2. Align the monitor mounting plate with the indented hole fitting into the top of the shaft. Insert the shorter socket screw. 1 3. Tighten the socket screw with the Allen key. 2 4. Insert the longer bolt through the center hole in the triangular base with the bolt cap on the same side as the rubber feet. 3 5.
Operating Instructions Important: Make all height and location adjustments before mounting your monitors onto the stands. 1 Adjusting the height 1. Loosen the locking knob. 1 2. Raise or lower the telescoping shaft to the desired height and insert the locking pin through the hole. 3. Lower the shaft until is rests on the locking pin. Tighten the locking knob. 2 2 Mounting the monitors 3 1. Once you’ve set the height of the stand, you can safely mount the monitor on the mounting plate. 3 2.
Changing the feet The TMS-135 Studio Monitor Stands include adjustable leveling spikes for stability on carpeted surfaces. To replace the rubber feet with the leveling spikes, do the following: 6 1. Turn the stand upside down. 2. Unscrew the three rubber feet. 3. Screw in the three leveling spikes. 6 4. Place the stand upright on its base and adjust the leveling spikes to conform to the surface.
Recommended accessories IP-M: Auray Isolation Pad for Studio Monitor (Medium, Single) IPRS-M: Auray Stabilizing Isolation Pad for Studio Monitors (Medium, Single) S0508-10-B: Pearstone 0.5 × 8˝ Touch Fastener Straps (Black, 10-Pack) RC1002-05-B: Pearstone 1 × 2˝ Rapid Close Wall-Mountable Cable Ties (Black, 5-Pack) Specifications Minimum height: 36˝ (91 cm) Maximum height: 54˝ (137 cm) Load capacity: 90 lb. (40.8 kg) Plate size: 9˝ × 9˝ (23 × 23 cm) Weight: 8.4 lb. (3.
One-Year Limited Warranty This AURAY product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
