IPS MONITOR EQ246W USER GUIDE
CONTENTS Getting Started .......................................................................................... 3 Setting up your Monitor .......................................................................... 4-7 Connecting your Monitor to your computer ........................................... 8-10 Using your Monitor ................................................................................... 11 Adjusting your Monitor’s Settings.........................................................
GETTING STARTED Your IPS Monitor is designed to work seamlessly with Windows devices that contain a VGA or DVI-D input. You may also use it with Apple devices via Apple’s mini DVI connector. It features a 24” LCD screen with 1920 x 1200 resolution.
SET-UP YOUR MONITOR: STEP ONE Check to make sure your packaging includes each of the following: 1. IPS Monitor / Monitor base 2. Warranty card 3. Signal cable (VGA Cable) 4.
SET-UP YOUR MONITOR: STEP TWO Connect your monitor to the base. Cover an even stable surface with a soft cloth. Place the LCD monitor unit face-down on the cloth, rotate and fit the stand onto the bottom of the LCD monitor unit as shown, until the stand is firmly fixed. How to wall mount your monitor Use four machine screws to mount the monitor on the bracket. This unit is VESA-compliant and designed to be wall-mounted with a VESA-compliant 100mm X 100mm mounting kit.
SET-UP YOUR MONITOR: STEP THREE Follow these instructions to adjust your monitor’s viewing angle: Hold the base of the monitor with one hand (to keep the screen from shaking) Using your other hand, grab the side or top of the monitor and tilt the screen forward or backwards. You may adjust the angle of the display from 5° (forward) to 20° (back). Do not touch the actual screen when you adjust view angle of the monitor as this may cause damage or scratching.
SET-UP YOUR MONITOR: STEP FOUR Connect your monitor to a power source. 1. Your monitor is compatible with 100/120V or 220/240V AC power sources. Ensure your local voltage meets these requirements 2. Plug-in your monitor’s power cord into your wall socket and into the back of your monitor. NOTE: using the device with voltages other than those listed above may cause permanent damage to the monitor. It is strongly recommend that you use a power strip with a surge suppressor.
CONNECT YOUR MONITOR TO YOUR COMPUTER OR DEVICE Plug in the Cable connecting your desktop, laptop or other device to your monitor. 1. Using an HDMI cable will provide the best performance and resolution, if this is not an option for you, DVI-D and VGA cables may also be used. 2. Turn on the source device then turn on the monitor (push power button on the monitor bezel).
CONNECTING YOUR MONITOR: FOR YOUR REFERENCE 1 Port Connections (Left to Right) • HDMI Connection • DVI-D Connection • VGA Connection • AUDIO Connection • USB IN Connection • USB OUT 1/2 Connection • AC IN Power Connection 9
CONNECTING YOUR MONITOR: FOR YOUR REFERENCE Plug the adapter into the monitor with the arrow facing upwards 10 When using a DVI-D cable, dual link is preferred as it will provide higher resolution.
USING YOUR MONITOR Turn on your monitor by using the ON/OFF power key (located on the bezel). The power ON indicator LED should be lit. In the following section you will learn how to adjust your monitor’s settings.
ADJUST YOUR MONITOR’S SETTINGS 1. Press the “MENU” key to activate the OSD interface. 2. Use the “UP” or “DOWN” Keys to browse the main functions. 3. In order to select a function press the “MENU” key. 4. If the function you need has a sub-menu use the “UP” or “DOWN” keys to navigate it, then press “MENU” to select. 5. Press “UP” or “DOWN” to adjust the selected function. 6. Click the “AUTO” button to save and exit. Selecting an input source 1. Press the “AUTO” button to display the input source list 2.
ADJUST PICTURE 1. Press the “MENU” key 2. Press the “UP/DOWN” buttons and browse to “PICTURE” in the main menu, then press “MENU” to select it. 3. Use the “UP/DOWN” keys to browse BRIGHTNESS, CONTRAST & GAMMA, click “MENU” to select and adjust any of these. 4. Use the “VOL + / VOL -” keys to adjust the settings. 5.
ADJUST COLOR 1. Press the “MENU” key 2. Press the “UP/DOWN” buttons and browse to “COLOR” in the main menu, then press “MENU” to select it. 3. Use the “UP/DOWN” keys to browse “PRESET, RED, GREEN or BLUE” click “MENU” to select and adjust any of these. 4. Use the “VOL + / VOL -” keys to adjust the settings. 5.
ADJUST TRACKING 1. Press the “MENU” key 2. Press the “UP/DOWN” buttons and browse to “TRACKING” in the main menu, then press “MENU” to select it. 3. Use the “UP/DOWN” keys to browse “HORIZONTAL or VERTICAL”, click “MENU” to select and adjust either of these. 4. Use the “VOL + / VOL -” keys to adjust the settings. 5.
ADJUST CLOCK, PHASE OR SHARPNESS 1. Press the “MENU” key 2. Press the “UP/DOWN” buttons and browse to “TRACKING” in the main menu, then press “MENU” to select it. 3. Use the “UP/DOWN” keys to select “CLOCK, PHASE or SHARPNESS” and click “MENU”. 4. Use the “VOL + / VOL -” keys to adjust the settings. 5.
ADJUST VOLUME 1. Press the “MENU” key 2. Press the “UP/DOWN” buttons and browse to “VOLUME” in the main menu, then press “MENU” to select it. 3. Use the “UP/DOWN” keys to browse “VOLUME or MUTE” click “MENU” to select and adjust any of these. 4. Use the “VOL + / VOL -” keys to adjust the settings. 5.
ADJUST OSD SETTINGS 1. Press the “MENU” key 2. Press the “UP/DOWN” buttons and browse to “SETUP” in the main menu, then press “MENU” to select it. 3. Use the “UP/DOWN” keys to browse “OSD HORIZONTAL, OSD VERTICAL or OSD TIMER”, click “MENU” to select and adjust any of these. 4. Use the “VOL + / VOL -” keys to adjust the settings. 5.
ADJUST MISCELLANEOUS SETTINGS 1. Press the “MENU” key 2. Press the “UP/DOWN” buttons and browse to “SETUP” in the main menu, then press “MENU” to select it. 3. Use the “UP/DOWN” keys to browse “WHITE BALANCE, DCR, ASPECT RATIO, INPUT SELECT or FACTORY RESET” click “MENU” to select and adjust any of these. 4. Use the “VOL + / VOL -” keys to adjust the settings. 5.
TROUBLESHOOTING Power pilot lamp is dim Check to make sure the power is turned ON Check to make sure the power cord is securely connected to both the monitor and the socket.
TROUBLESHOOTING Picture is not in the middle or incorrect size Adjust CLOCK and FOCUS or hot keys (AUTO) The images have color shading (white looks not pure white) Adjust RGB color or choose new color temperature Weak brightness and contrast Monitor brightness may be reduced due to over use. The monitor may need service. Please send monitor to authorized service organization for repair.
SPECIFICATIONS Panel Display Equipment Dimensions Dot Pitch (mm) Resolution (Max) IPS Panel (LCD backlight) 24.1” diagonal 0.270 x 0.270 1920 x 1200 (WUXGA) Input Signal VGA D-Sub 15 pin Connector DVI DVI Digital Audio Input 3.5mm stereo jack HDMI HDMI Connector USB USB HUB Frequency HFR (Horizontal Frequency) 40KHz - 80KHz VFR (Vertical Frequency) 58.
SPECIFICATIONS Power Equipment 50/60Hz AC Adapter: 100-240V Ambient Temperature Humidity Operating temperature:0~50°C Storage temperature:-20~60°C Operation relative humidity: 10~85% Dimensions (mm) 650(L) x 190(W) x 480(H) mm Weight (Net) 6.
PRESET DISPLAY MODES Resolution DOS Mode HFR(KHz) VFR(Hz) 720x400 31.469 70 VGA 640x480 31.469 60 640x480 37.861 72 640x480 37.500 75 SVGA 800x600 37.879 60 800x600 47.20 72 800x600 46.875 75 XGA 1024x768 1024x768 1024x768 48.363 60 56.476 70 60.023 75 SXGA 1280x1024 1280x1024 63.981 60 79.976 75 WXGA+ 1440x900 55.674 60 WSXGA+ 24 1680x1050 59.
PRESET DISPLAY MODES Resolution FULL HD 1920x1080 WUXGA 1920x1080 HFR(KHz) VFR(Hz) 67.50 60 74.
CARE & SAFETY Attention: Any unauthorized modifications or changes may cause the monitor to not work properly. The manufacturer is not responsible for radio or image interference caused by unapproved modifications. Users should solve interference issues by themselves. Warning: To prevent fire hazards or explosions, do not expose the monitor to rain or humid environments. Please do not open the monitor’s back cover or you may be exposed to high voltage current. Contact professional personnel for maintenance.
CARE & SAFETY Usage It is normal for your monitor to “blink” the first time you use it. If this occurs simply turn your monitor off, then on again. The effective screen pixels of your monitor should read 99.99% or more, pixel or brightness loss should be less than 0.01%. During normal usage your monitor should not have pixel residue. However, when the same static picture is showed a long time before changing the image, the previous image may remain, which is called “the shadow”.
CARE & SAFETY Cleaning & transport Keep the original box and other packing material in the event that you need to ship your monitor. To clean your monitor use a soft, dry cloth and only cleaners intended for use with a screen or display. Cleaners with alcohol or acetone will damage your screen. Any marks on the monitor should be cleaned gently so as to prevent damage. For your safety, please un-plug power cord before cleaning.
WARRANTY INFORMATION For Auria EQ246W Display Including those Sold within North America AURIA warrants this product to be free from defects in material and workmanship for a period of twelve months after the original date of consumer purchase. During this period, Auria will, at its option, either repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except as *stated below. The parts or products that are replaced become the property of Auria.
WARRANTY INFORMATION Auria will pay for the return shipment charges within the USA and is not responsible for any costs across any international borders. In the USA or Canada, please contact your local dealer or call Auria customer service at (877)375-1065. If the unit is found not to be defective, the unit will be shipped back at the owner’s expense.
WARRANTY INFORMATION ALL EXPRESSED AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURAION TO A PERIOD OF ONE (1) YEARS FOR PARTS AND LABOR FROM THE ORIGINAL DATE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD. IN THE UNITED STATES OF AMERICA, SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
EQD is located at: 3309 E. Miraloma Avenue Suite 107 Anaheim, CA 92806 For Customer Service please call 877-375-1065 or visit www.eqdcorp.
