User Manual

19 GB
Setting the time, time zone and
weekday manually
Press and hold down the MODE button
12
for approx.
3seconds. The minute display
4
flashes.
Press the UP
13
or DOWN
11
button to set the
desired time zone (–12 hours to + 12 hours).
Note: Should you be in a country in which the DCF
signal can be received but the time is different to your
current local time, you can use the time zone setting
to have the clock display your current local time. For
example, if you are in a country where the local time
is one hour behind Central European Time (CET), then
you should set the time zone to + 01. The time continues
to be controlled by DCF but the clock shows one hour
more.
Press the MODE button to confirm your setting.
Set the hours, minutes, the year, the day and the lan-
guage of the weekday in the same manner.
Note: The following languages are available:
GER = German
ENG = English
DAN = Danish
ESP = Spanish
NET = Dutch
ITA = Italian
FRA = French
Setting the alarm
The radio-controlled alarm clock is equipped with
two alarm functions. Press and hold down the
SET
button
14
or the SET button
10
to set Alarm1 or
Alarm2. The hour indicator
17
of the alarm time
flashes in the display.
Press the UP
13
or DOWN
11
button to set the hours.
Press the MODE button
12
to confirm your setting.
The minute indicator
4
flashes in the display.
Press the UP
13
or DOWN
11
button to set the minutes.
Press the MODE button to confirm your setting. The
weekday indicator / weekday- and weekend alarm
indicator
15
flashes in the LC display.
Press the UP
13
or DOWN button
11
to set the alarm
for the weekday or the weekend (M-F = Monday to
96487_aur_Funkwecker_Content_HU_SI_CZ_SK.indd 19 28.01.14 11:43