Operation Manual

Basic settings

The following basic settings can be adjusted: time

zone, hours, minutes, year, month, day and language

of the day of the week display. Press and hold MODE

14 for about 3 seconds in normal time display mode.

The time zone will blink and can be set by pressing

15 or 13. Press MODE 14 to confirm your setting.

Please note: If you are in a country, in which the clock

displays the wrong time even though it can receive the

time signal, please use the time zone adjustment to use

your alarm clock in a time zone other than the

standard time zone (UTC+1 = Central European Time).

Set the difference in hours (- 01 for example) to the

desired time zone. Restart radio reception after

changing this setting. Your clock receives the DCF77

time signal but will show the adjusted time (1 hour less

for example).

Set the hours, minutes, year, month, day and language

of the day of the week display in the same way. The

following languages are available: GER = German,

FRA = French, ITA = Italian, NET = Dutch, ESP =

Spanish, DAN = Danish, ENG = English. Press MODE

14 to confirm your setting.

Alarm

The alarm clock has 2 alarms which can be set

separately. Alarm 1 and Alarm 2.

Press and hold SET 16 or SET 12 to enter alarm

time setting mode. The hour will blink on the display.

Press 15 or 13 to set the hour and confirm

your setting by pressing MODE 14. Set the minutes

and the days of the week in the same way. The

following days of the week are available: M-S =

Monday through Sunday, M-F = Monday through

Friday, S-S = Saturday through Sunday.

Activating or deactivating the alarm

Press SET 16 or SET 12 in normal time display

mode to activate or deactivate alarm 1 or alarm 2. The

bell symbol 5 or appears when an alarm is

activated.

SNOOZE

When the alarm sounds, press SNOOZE/LIGHT 4 on

the top of the alarm clock. The light will be activated

briefly, Z

and the bell symbol will blink on the display.

The alarm is briefly deactivated and will sound again