Operation Manual

16 GB/IE
Operation
As soon as the batteries are inserted, automatic reception
of the radio signal begins. The correct time and the date
are displayed after 3–10minutes. During reception, all
buttons are deactivated except the DOWN button
11
and
the SNOOZE / LIGHT button
19
. You can stop the reception
of the radio signal by pressing the DOWN button. To restart
the reception, press and hold down the DOWN button.
Note: Do not change the location of the projection radio-
controlled alarm clock during reception. This may disrupt
reception.
Radio Signal (DCF):
The DCF signal (time signal transmitter) consists of time
impulses, which are transmitted from one of the most
accurate clocks in the world, in the proximity of Frankfurt /
Main, Germany – it varies by 1 seconds in 1 million years.
Your radio-controlled alarm clock will receive the time sig-
nal under optimum conditions up to a distance of approx.
1,500 km from Frankfurt am Main, Germany. Reception
of the radio signal generally takes approx. 3–10 minutes.
R
(
e
o
a
T
86663_aur_Funkwecker_Content_LB3.indd 16 21.01.13 13:25