Quick Start Guide

Pairing with Two Bluetooth Headphones

In TX mode, bluMe Duo can stream audio to two Bluetooth headphones

simultaneously. A second headphone can be paired after one headphone is

already connected.

Step 1: Connect your first headphone with bluMe Duo by following the previous

pairing instructions.

Step 2: Set your second headphone to pairing mode. Now press and hold the

MFB on bluMe Duo till the display shows “Searching...”. Your headphone will soon

show on the display. Double press the MFB to select your device to connect.

Once paired, your bluetooth device name will show on the display with this

icon “ ” indicating 2nd paired device.

Step 3: The sound from your TV will now play through both the Bluetooth

headphones simultaneously!

Note: After connecting with two Bluetooth headphones, the highest codec

supported by both devices will show in the display e.g. if device “1” supports AAC

and aptX LL codecs, while device “2” supports AAC codec, then the codec

indicator will show “AAC” in the display. After disconnecting with one of the devices,

the highest codec supported by the remaining device will show in the display.

Connecting to a TV and Soundbar / Speaker

When bluMe Duo is used as a transmitter with a TV using its audio inputs, its audio

output can be used as a bypass to connect another device such as a speaker or

soundbar. This makes it possible to plug both bluMe Duo and a soundbar/speaker

into a TV that only has one audio output.

The following instructions will help you setup the bluMe Duo audio bypass

feature to work with your speaker / soundbar in Bypass mode after connecting

bluMe Duo to your TV in TX mode.

Step 1: Follow the previous instructions to connect bluMe Duo to your TV using

the digital optical input “OPT IN”.

Step 2: Plug a digital optical cable from the bluMe Duo audio output “OPT OUT”

to your soundbar / speaker’s digital optical input “OPT IN”.

Note: Bypass feature only works if you have the TV connected to your bluMe Duo

via the Opitical Input and does not work via AUX.

Step 3: Select the mode “BYPASS” by sliding the TX - BYPASS - RX toggle switch

of bluMe Duo.

Step 4: The bypass feature is now active and sound from your TV will play through

speaker / soundbar!

QUICK SETUP: BYPASS MODE