050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 Auro Comfort 1050 13:25 Uhr GB Overview: Flashlight Earpiece Eye for strap LED indicates network coverage and call Loudspeaker for hands-free Help call key Socket for earphone Display Volume adjustment M2 direct dialling key M3 direct dialling key Back/Delete Hands-free M1 direct dialling key Call menu Save OK Switch for torch Accept call Device ON/OFF End call v Scroll up .
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 13:25 Uhr Title 1Comfort 1050 Auro Enjoy pure telephony NOTE Go to www.branddistribution.de and read the detailed operating instructions in the chapters “Additional Safety Information”, “Technical Data”, “Maintenance and Care”. Keys with important additional functions in the idle mode GB Thank you for choosing the Auro Comfort 1050.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 Table of Contents 1 Important Safety Information . . . . . . . GB 6 2 Before Operation 2.1 Scope of Delivery . . . . . . . . . . . . . . . 8 2.2 Information on Disposal . . . . . . . . 8 3 Starting Up 3.1 Inserting the SIM Card . . . . . . . . . 3.2 Inserting the Battery . . . . . . . . . . . . 3.3 Charging the Mobile Phone . . . . 3.4 Switching the Device on/off . . . . 3.5 Display Symbols . . . . . . . . . . . . . . . . 4 Making Phone Calls 4.
1050_Inbetriebnahme_GB.qxd:Branddistribution Title 1of Contents Table 7.5 Restore Factory Settings . . . . . . . 23 7.6 Set M1 / M2 / M3 . . . . . . . . . . . . . . . . 24 7.7 Set Time & Date . . . . . . . . . . . . . . . . . 25 7.9 GPS (Global Positioning System) . . . . . . . . . . . . . . . . . . . . . . . . . . 7.9.1 Switching GPS On/Off . . . . . 7.9.2 Setting the GPS Area . . . . . . 7.9.3 Setting Alarm Call Numbers for GPS . . . . . . . . . . 7.9.4 Switching the GPS Alarm On/Off . . . . . . . . . .
1050_Inbetriebnahme_GB.qxd:Branddistribution 1 Important Safety Information 26.08.2008 13:25 Uhr GB Read this instruction manual carefully, in particular the safety instructions, before you begin using the device, and keep the instruction manual for future use. If you pass the device on to Non-observance of these a third party, be sure to pass on this manual, too. For more manual can result in serious injury or damage to the device. detailed information than is contained in this manual, go to www.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 1 Important Safety Information 13:25 Uhr GB • Make sure than small children do not play with the packaging material (danger of suffocation). The device and its accessories may contain small parts that can be ingested. Special care is needed if the device is to be used in the vicinity of small children or sick or disabled people. Keep the phone out of reach of such persons.
1050_Inbetriebnahme_GB.qxd:Branddistribution 2 Before Operation 26.08.2008 13:25 Uhr GB 2.1 Scope of Delivery • 1 Auro Comfort 1050 mobile phone • 1 battery 100-240 V~, 50/60 Hz, 200 mA • 1 power supply unit Input: Output: 5 V ..., 800 mA • 1 desktop charging station • 1 operating manual • 1 compact manual 2.2 Information on Disposal Packaging is reusable, or can be recycled. Please correctly dispose of packaging matarial no longer required.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 3 Starting Up 13:25 Uhr GB 3.1 Inserting the SIM Card 3 2 SIM 62 2475 87456 A 01724 1 3.2 Inserting the Battery 1 2 3 4 3.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 3 Starting Up 13:25 Uhr GB 3.4 Switching the Device on/off Press and hold down until the device switches on PIN: Enter the PIN of the SIM card Confirm PIN Press and hold down until the device switches off 3.
50_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 4 Making Phone Calls 4.1 Accepting a Call 13:25 Uhr GB Press to accept a call Press to end a call or to reject an incoming call 4.2 Making a Call Enter the desired phone number with the area code Press to delete the last number Press and hold down to delete all numbers Press to dial the number displayed Press to end the call or to interrupt the dialling 4.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 4 Making Phone Calls 4.4 Making a Call with the Phonebook NOTE To save phone numbers in the phonebook, read section 7.8.1. 4.5 Calling Names (A-Z) from the Phonebook (Quick Search) 13:25 Uhr GB Press to open “Phonebook List” Press until the desired phone number appears Press to dial the phone number displayed Press to end the call or to close the phonebook Press to open “Phonebook” Enter the first letters for the person you want to call E.g.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 4 Making Phone Calls 4.6 Redialling 13:25 Uhr GB Press to open the call list Press until the desired phone number is selected Press to dial the phone number displayed Press to end the call or to close the call list 4.7 Making/Ending an Emergency Call NOTE Save up to three help numbers that will be dialled in sequence in case of an emergency. If no help number is entered, the phone dials 112 For reporting settings, see section 7.11.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 4 Making Phone Calls 13:25 Uhr GB Press the help call key and push it downwards 4.8 Phoning with the Hands-Free Function Press during a phone call to switch the hands-free function on Press again during a phone call to switch the hands-free function off again 4.9 Listening and Key Tone Volume WARNING Never hold the mobile phone to your ear when it is ringing, when the hands-free function is active, or when an emergency call has been triggered.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 5 Menu 5.1 Navigating in the Menu The device is equipped with numerous functions that can be set in the menu. 13:25 Uhr GB Press in idle mode to go to the main menu. The following menu items are displayed: Messages Phone Setting Set M1/M2/M3 Clock & Alarm Phonebook GPS & SOS Setting Calculator Calendar SIM Toolkit Press in the main menu to select the desired menu item Press again to open the selected menu item, e.g.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 5 Menu 5.2 Fast Keys 5.3 Set Fast Key 2-9 13:25 Uhr GB Fast keys 2 to 9 are useful for getting to the most important menu items quickly. By pressing and holding down one of these keys, you call up the menu item assigned to it. For example, “Alarm”, “Select image”, etc...
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 6 Messages (SMS) 13:25 Uhr GB SMS messages are short written messages. They can be entered, sent and received with mobile phones and some landline phones. A signal tone and the message “1 New Message!” in the display indicate that a new SMS message has been received. 6.1 Display SMS Message Press to display the message 6.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 7 Settings 7.1 Change Language 13:25 Uhr GB In the Display Setting menu, you can adapt, for example, the language, screen saver, etc. to your personal requirements. Press to open the main menu Press to go to “Phone Setting” Press to open “Phone Setting” Press to open “Display Setting” Press to open “Language” NOTE Pressing the key returns you to the idle mode. 7.2 Sound Setting 7.2.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 7 Settings 13:25 Uhr GB Press to open “Sound Setting” Press to select “Set Volume” NOTE Pressing the M3 key takes you back to the previous level from any level. Pressing the key returns you to the idle mode. Press to open “Set Volume” Press to open “Ring Tone Vol.” Press to select the volume you desire Press to confirm your selection 7.2.2 Change Message Tone Volume Procedure to change “Message Tone Vol.” (7 volume levels) as in section 7.2.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 7 Settings 7.2.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 7 Settings 7.3 Auto Key Lock 13:25 Uhr GB Protects against accidental pressing of phone keys Press to go to menu Press to go to “Phone Setting” Press to enter “Phone Setting” Press to go to “Auto KeyLock” Press to enter “Auto KeyLock” NOTE A call can be accepted by pressing the accept call key even if the keys are locked. The lock is reactivated when the call is finished. To deactivate the keypad lock again, set None in the menu.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 7 Settings 13:25 Uhr GB 7.4 Change Password Press to go to the main menu Press to go to “Phone Setting” Press to enter “Phone Setting” Press to go to “Security Setting” Press to enter “Security Setting” Press to go to “Change Password” Press to enter “Change Password” Press to go to the password you want to change (e.g.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 7 Settings 13:25 Uhr GB Enter Again: I Repeat the new PIN Press to confirm your entry 7.5 Restore Factory Settings Press to go to the main menu Press to go to “Phone Setting” Press to enter “Phone Setting” Press to go to “Restore Factory Settings” Press to enter “Password:” Password: I NOTE The settings in the phone are changed. Data stored on the SIM card is retained.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 7 Settings 7.6 Set M1 / M2 / M3 13:25 Uhr GB Press to go to the main menu Press to go to “Set M1/M2/M3” Press to enter “Set M1/M2/M3” Press to select the direct dialing number to be saved Press to enter “Options” Press to enter “Phonebook” Press until the desired phone number appears or Enter the first letters for the person you want to call E.g.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 7 Settings 7.7 Set Time and Date 13:25 Uhr GB Press to go to the main menu Press to go to “Clock & Alarm” Press to go to “Time & Date” Press to go to “Set Time & Date” Press to enter “Set Time & Date” Enter the current time: hours (HH), minutes (MM) Press to enter the date Enter the current date: year (YYYY), month (MM), day (TT) NOTE In the “Format” menu you can change the display time format: 12/24 hours and the date format e.g.: DD / MM / YYYY.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 7 Settings 7.8 Phonebook 7.8.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 7 Settings 13:26 Uhr GB Press to save the entry Press to confirm saving the entry or Press to cancel Press to return to the idle mode 7.8.2 Delete entry Press to open “Phonebook” Press until the desired phone number appears or Enter the first letters for the person you want to call E.g.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 7 Settings 13:26 Uhr GB When you press this, “Delete?” appears Press to delete the entry or If you do not want to delete it Press to return to idle mode 7.8.3 Copy Entries (SIM -Phone) Press to open “Phonebook” Press until the desired phone number appears or Enter the first letters for the person you want to call Copying Entries Entries saved on the SIM card are copied to the mobile phone. Entries on the mobile phone are copied to the SIM card.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 7 Settings 13:26 Uhr GB When you press this, “Copy?” appears Press to copy the entry or If you do not want to copy it Press to return to idle mode 7.8.4 Set the Default Phonebook Press to go to the “Main Menu” Press to go to “Phonebook” Press to enter “Phonebook” Press to go to “Default Phonebook” Press to enter “Default Phonebook” Phonebook Only if you select "Both" the phonebook will display the entries from the SIM card and the mobile phone .
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 7 Settings 7.9 GPS (Global Positioning System) 7.9.1 Switching GPS on /off 13:26 Uhr GB Your Auro Comfort 1050 is equipped with a GPS receiver. In case of an emergency the current location of the mobile phone user can be determined with the help of the satellitecontrolled Global Positioning System. A text message then will be sent to predefined help numbers and center number. GPS signals can only be received when there is clear view to the sky.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 7 Settings 13:26 Uhr GB Press to go to the main menu Press to go to “GPS & SOS Settings” Press to enter “GPS & SOS Settings” Press to go to “Zone Setting” Press to enter “Zone Setting” Press to go to “Center-AutoSet” or to “Center-ManualSet” Setting the GPS area automatically Press to go to “Radius (m)” Enter the radius for the safety area (at least 200 m). The current position is used for latitude and longitude.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 7 Settings Setting the GPS area manually GB Press to go to “Radius (m)” Enter the radius for the safety area (at least 200 m). Press to enter the longitude GPS area You can check the position of the GPS area online on Google Earth by entering the longitude and latitude. Enter the longitude with no more than six decimal places (e.g. 10.914745°) Press to enter the latitude Enter the latitude with no more than six decimal places (e.g. 47.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 7 Settings 7.9.3 Setting Alarm Call Numbers for GPS 13:26 Uhr GB Press to go to the main menu Press to go to “GPS & SOS Settings” Press to enter “GPS & SOS Settings” Press to go to “Zone Setting” Press to enter “Zone Setting” Alarm Call Numbers You can set up to three alarm call numbers. These numbers will be informed by text message if the user leaves and if he later returns to the set GPS area.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 7 Settings GB Press to select the highlighted phonebook entry Press to return to idle mode 7.9.4 Switching the GPS Alarm On/Off Press to go to the main menu Press to go to “GPS & SOS Settings” Press to enter “GPS & SOS Settings” GPS Alarm The GPS alarm notifies the user that he or she has left the set GPS area and that the three alarm call numbers have been informed by text message.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 7 Settings 7.10 Remote Control 13:26 Uhr GB Press to go to the main menu Press to go to “GPS & SOS Settings” 7.10.
1050_Inbetriebnahme_GB.qxd:Branddistribution 7 Settings 26.08.2008 13:26 Uhr GB Text messages with remote control commands will only be 7.10.2 Sending Remote accepted by the mobile phone with the call number saved as Control Commands the “Remote Control Number”. by Text Message If you have the template text messages sent to the Remote Control Number when you entered it, you should save those template text message.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 7 Settings 7.11 Help Setting 13:26 Uhr GB Press to go to the main menu Press to enter “GPS & SOS Settings” 7.11.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 7 Settings 13:26 Uhr GB Press to return to idle mode 7.11.2 Sending a Help Call to One or All Help Numbers Press to go to the main menu Press to go to “GPS & SOS Settings” Press to enter “GPS & SOS Settings” Help Calls If you have selected "All", the mobile phone calls all the help numbers in sequence until it has connected to every number.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 7 Settings 7.11.3 Predefine Help Message 13:26 Uhr GB Press to go to the main menu Press to go to “GPS & SOS Settings” Press to enter “GPS & SOS Settings” Help Message The help message will be shown in the mobile phone display, in case of an activated help call. Press to go to “Predefine Help Message” Press to enter “Predefine Help Message” Enter the help message.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 7 Settings GB Press to go to “Sound Setting” Press to enter “Sound Setting” Help Tone The activated help tone siren will continue to sound after the help number dial sequence has completed.
1050_Inbetriebnahme_GB.qxd:Branddistribution 26.08.2008 16:49 Uhr GB We reserve the right to make formal changes towards improving and developing the product further. © International Brand Distribution GmbH 08/2008 The Auro Comfort 1050 mobile phone complies with EU directive R&TTE. It also complies with the European Electromagnetic Compatibility (EMC) and Product Safety Directive. Thus, the Auro Comfort 1050 carries the CE marking.
