(or 1 Lan SINGLE KITCHEN Face NO.
oe eee Screw the lock nut to. the body of the faucet, and 2.Put the faucet into the installation hole. then Install the base on. Tighten the hot and cold (Suggestion: hose with the body of the faucet: diameter 35MM for installation hole } Put the washer and gasket on the lock nut as shown, then tighten with screws. 3s 04.
ppg Maintenance: temperate the faucet gently:in order for a sustainable use: 2:Always Blot dry any water from faucet surface:Clean with a damp non-abrasive song ha and wipe it with a.clean soft cloth should v8 helpful to:maintain good finish of the Tate To remove water spots apply warm water and a. soft. cloth. Make certain to tinge thong whitewater immediately after cleaner. 3. Although the finish is extremely durability can ba damaged by some cleaners.
ten? Checkingandiesting . Turn-on the hot and cold water for 1 minute in 2.Check all connection at arrows for leaks, larder to check the outlet re=tighten it if necessary.