User guide

7
User Guide
General Settings
Status - Shows the current IP Address, Hostname, Mac Address, Serial number, and the firmware
revision.
Change Password – The default password is admin. It is recommend to change the password for better
security on the network especially if it is not private.
Reset Factory Defaults – Once pressed a confirm screen will appear. Once confirmed the unit will
restore the default IP address and password.
Firmware Update Mode – This but forces the unit into an update mode. It is recommended to use the
firmware update tool LXupdate which is available on the Aurora website.
Restart DXE-LXC – Remotely reboots the unit.