User guide

8
User Guide
Network Settings
Current Network Settings - Shows the current IP Address, Subnet Mask, Gateway, Hostname, and
Mac Address.
Network Configuration – This section allows the turning on/off of the DHCP and allowing the entry of
static IP settings if DHCP is not utilized. If you use DHCP it is always recommended to use a switch that
can map the MAC address to a defined IP address otherwise the IP address may change inadvertently at
a later time making it difficult to target the device. Hostname can only be utilized on a NETBIOS system.
If TCP commands are used there is a setting for the TCP server port number. Make certain once done
making changes to press apply changes.