Manualshelf

User guide

ManualsBrandsAurora Multimedia ManualsComputer equipmentDXE-CAT-S2L
12345678910
2
User Guide
INTRODUCTION
About
The DXE-CAT-S2L is part of the growing Digital Xtreme Series. This product is different than the
typical CAT extender found on the market today as it not only breaks the price barrier but the
feature and usability aspects as well. All connectors are on one side to make wiring cleaner and
rack mounting easier. Having the ability to power the device with the choice of transmit or receive
reduces the installation time and keeps things neat. An industry first is Aurora’s exclusive
Flex-Power
TM
Power-Over-Ethernet circuit (Patents Pending), which allows both the transmitter
and receiver to be powered without the need of any wall supplies.
The DXE-CAT-S2L is also unique as it combines IP control with an extender. Normally extenders
simply pass the RS-232 and IR from one device to the other, however, the DXE-CAT-S2L can
target a local or far end port via TCP, RPC, or Telnet commands from any control system or PC
on the market. It also has the ability to serve up web pages via the LAN port to any device with a
web browser.
Being able to go the distance is important too, and HDBaseT technology helps achieve that. With
a single CAT cable, the DXE-CAT can go up to 330ft 1080p 60Hz 48bit color depth, 500ft 1080p
60Hz 24bit (CAT 6), or 600ft 1080p 60Hz 24bit (CAT 6A Shielded) depending on model. In
addition, the RS-232, IR, & LAN can be sent over the same cable bi-directionally.
Features
Transmit HDMI up to 1080p 60Hz 48bit 330ft over one CAT 5e/6/7 cable
Transmit HDMI up to 1080p 60Hz 24bit 500ft over one CAT 6 cable
Transmit HDMI up to 1080p 60Hz 24bit 600ft over one CAT 6A Shielded cable
Supports 4K x 2K & HDMI 3D
HDCP Compliant
IP Control System (32 bit) / Web Server with 8MB of Storage
All connectors on one side for easier installation
Bi-directional RS-232 & IR & LAN
Power both units from TX or RX side with wall power supply (HDBaseT POE)
LAN POE (Power-Over-Ethernet) can power both TX & RX without wall supplies (Patents
Pending)
Status LED for all connections on front
Various mounting options