Installation manual

D-TUNE Installation Manual
9
The main menu:
This menu allows a user to select the desired sub-menu for further configuration or to set default settings.
“Set default settings”.
These sub-menus are discussed in more detail in the subsequent chapters.
7.3 General Settings
This menu allows control of various “general” aspects of D-TUNE behavior. Note that the *-marked
options are accessible only in Service mode, and not in Stand-alone mode.
A/V Input – Allows user to select the audio/video input source (among the built-in Tuner and
available AV-inputs)
Current time – Allows to set the current time
Timer On – Allows display turn on time enable/disable and the time at which it occurs
Timer Off – Allows display turn off time enable/disable and the time at which it occurs
Sleep timer – Allows user to set the sleep timer
Def. power – Configures default “power” state when the power is applied to the D-TUNE (it is
connected to the mains). “Off” means the D-TUNE will remain in a “sleep” state
after attaching power supply until switched on by IR transmitter command. “On”