Installation manual

D-TUNE Installation Manual
6
Example of interconnections for a display device, D-TUNE, VCR (or other source of composite video),
and TV antenna or cable is shown below. Note that standard RCA cables for audio and video connections,
standard S-Video cable, or RF antenna cables are not supplied with the D-TUNE.
S-Video 4-pin mini-DIN connector is intended for S-Video signal input (VCR, DVD, other signal
source).
The supplied audio input/output adapter cable has labels on cables near RCA connectors, indicating the
purpose of each RCA connector. These labels are:
SVideo Left Audio
SVideo Right Audio
YPbPr Right Audio
YPbPr Left Audio
Video Left Audio
Video Right Audio
Line Out Left
Line Out Right
The respective audio input channels are selected when the corresponding video input is selected (e.g., S-
Video input).
Component RGB+HV or YPbPr video signal can be connected to the 15-pin male connector of D-TUNE:
- using a standard VGA cable for RGB+HV VGA signal;
- using an adapter cable for YPbPr signal (Y=Green RCA, Pb=Blue RCA, Pr=Red RCA).