Specifications

20
(1st
Time)
500
Intake and
Exhaust
Valves
Adjust valve head clearance after
the first 20 hours of operation
and then every 500 hours.
500
Primary and
Prefilter, Air
Filter
Elements
Replace air filter elements
20
(1st
Time)
200
Cylinder Head
Nuts
Check after first 20 hours of
operation and then every 500
hours. Check for loose head
nuts. Torque cylinder head nuts.
Head nuts are
loose.
1000
Fuel Injector
Replace every 1,000 hours.
2000
Fuel Injection
Pump
Replace fuel injection pump.
x
Generator
Set, Engine/
Alternator,
and Control
Panel
Check for damage, corrosion,
missing, or loose attaching
hardware
Damaged,
corroded,
missing, or loose
hardware
x
Fuel Lines
Inspect for breaks and/or
damage. Replace damaged fuel
lines.
Fuel lines leak or
show signs
of wear or
damage
x
Fuel Tank
Check for damaged, corroded, or
missing fuel fill strainer, tank cap
lug, and retaining rope.
Damaged,
corroded, or
missing
components
x
Alternator
Check for damaged flexible
sleeve coupling and flexible
flange couplings
Damaged
alternator
coupling
components
x
Control Panel
External
Check for damaged, corroded, or
missing convenience receptacle
and cover (MEP-531A); LOP
engine shutdown cable grommet
and cable guide; and slave
receptacle.
Damaged,
corroded, or
missing control
panel
components.
x
Control Panel
(Internal)
Check for any lose wiring,
damaged or bruned wires and
insulation on all electrical leads
and harnesses. Ensure that
protective cover on rear of
instrument panel is secure.
Damaged control
panel
components
x
Electrical
Outlets
Check for damaged or corroded
load terminals, electrical outlets,
plugs and any fasteners.
Damaged or
corroded load
terminals or
receptacles
AGI6500DE & AGI6500SDE Operator / Owners Manual Version 11.4
Page 25