Specifications

Air Filter Element Replacement.
Removal
1. Shut down the generator set
2. Remove 4 nuts securing metal cover on the silent diesel generator to expose the
air filter assembly inside the enclosure.
3. Remove the wing nut
4. Remove the pre filter element
5. Remove the paper element
6. If necessary, remove gaskets from mounting plate and cover. Clean adhesive
residue from surfaces
Inspecting and Cleaning
1. Inspect cover for cleanliness, cracks and other damage. Clean cover with mild
soap and water.
2. Inspect filter element for cleanliness, dents, and crushed corrugations
3. Replace damaged parts.
4. Replace filter element if dirty
5. Replace pre-filter.
Installation
1. If removed, install new gaskets on mounting plate and cover
2. Soak new pre-filter in clean engine oil and squeeze out ALL
3. Install pre-filter over filter element. Pre-filter should fit snugly over filter element
4. Position filter element with pre-filter and cover on mounting plate
5. Install wing nut.
AGI6500DE & AGI6500SDE Operator / Owners Manual Version 11.4
Page 28