Shredder User Manual 1-800-327-8508 USA Only 1-310-793-5650 International Email: info@auroracorp.com AS890C Model No. For more information, please visit us at: www.auroracorp.com Please read these operating instructions before using the unit.
WARNING: SAFETY INSTRUCTIONS, READ BEFORE USING! Read instructions before use. Do not spray or keep any aerosol products in or around the shredder. Avoid touching the document feed opening with hands. Keep loose clothing or jewelry away from the paper entry slot. Product is not intended for use by children (product is not a toy). Avoid getting hair near the paper entry slot. Do not insert foreign objects into the paper entry slot.
Paper Shredder Operating Instructions Installation Sheet Capacity Paper Shred Size Operation Maintenance Troubleshooting Service Center Limited Warranty Paper Entry Width 8 Sheets of 20 lb. bond paper* 7/32 in. x 1 27/32 in. pieces (0.56 cm x 4.7 cm pieces) 8.7 in / 220 mm Credit Card / CD Capacity 1 at a time Duty Cycle 2 min. on / 30 min. off Voltage 120V~60Hz / 2.
OPERATION Control Switch Using the switch located on the unit, select one of the following settings by sliding the switch either left or right. (FIGURE 2) I AUTO / ON: This setting allows the shredder to be automatically started by inserting paper into the feed slot. Always feed the paper in as straight as possible. When the paper has passed through, the shredder will automatically stop. READY: The green LED light indicates the shredder in “On” and ready for use.
OPERATION Paper / Credit Card Entry: Make sure you do not exceed sheet count per pass (8 sheets max). Insert paper as straight as possible into feed slot and release. Insert one credit card at a time into the middle of the feed slot. LED Status Indicators: • Power On: The Green LED light indicates the shredder is “On” and ready to operate when paper is inserted.
MAINTENANCE Warning: Failure to properly maintain your shredder will void the warranty. Oil the shredder blades every month with basic vegetable, cooking oil or shredder oil. Follow oiling procedure below (FIGURE 3). It helps to keep the shredder blades operating well over many years of use. Oiling procedure: 1. Turn off shredder. 2. Apply shredder oil across paper entry. 3. Turn shredder in reverse mode for 3~5 seconds. Note: lubricating oil is NOT included.
TROUBLESHOOTING If there is a problem with your shredder, check below for the symptoms and steps to resolve. If you continue to have problems, contact customer support at our Service Center. DO NOT ATTEMPT TO REPAIR BY OPENING THE SHREDDER HEAD. This will completely void the product warranty. The shredder does not work at all. 1) Make sure the unit is plugged in and that the outlet is in good working order.
TROUBLESHOOTING 2) With stubborn situations where the reverse function does not help, you may loosen the jammed paper with shredder oil (cooking oil is acceptable, nothing aerosol). Start by drizzling oil into the feed slot where the paper is jammed. Let it soak for about 30 minutes to completely saturate. Return the shredder back to Auto-On mode.
SERVICE CENTER If you have any questions in regards to the operation of this shredder or in need of a spare part, please contact our service center at: Aurora Corp. of America Telephone: 1-800-327-8508 (U.S.A. only) or 1-310-793-5650 (International) Business hours: Monday to Friday 8:00 am - 5:00 pm PST (Pacific Standard Time) Email: info@auroracorp.com Or for more information, please visit our website at http://www.auroracorp.
1-800-327-8508 USA Only • 310-793-5650 International • Email: info@auroracorp.com • For more information, please visit us at: www.auroracorp.com 101317 © 2017 Aurora Corp.
