USERS GUIDE ASP-S123V Presentation Scaler Switcher i Manual Number: 130301
User Guide SAFETY INSTRUCTIONS Please review the following safety precautions. If this is the first time using this model, then read this manual before installing or using the product. If the product is not functioning properly, please contact your local dealer or Aurora for further instructions. The lightning symbol in the triangle is used to alert you to the presence of dangerous voltage inside the product that may be sufficient to constitute a risk of electric shock to anyone opening the case.
User Guide TABLE OF CONTENTS PACKAGE CONTENTS .............................................................................................................1 INTRODUCTION........................................................................................................................2 About............................................................................................................................................... 2 Features ...........................................................
User Guide PACKAGE CONTENTS Please make sure the following items are included within your package. Contact your dealer if any items are missing or damaged. ASP-S123V Presentation Scaler x 1 Power Cord x 1 DXE-CAT-RX1 HDBaseT CAT Receiver x 1 (Not included in –NC model) Note: Go to www.auroramultimedia.
User Guide INTRODUCTION About The ASP-S123V is a presentation scaler switcher designed for multi-signal processing of Composite Video, S-Video, Component Video (YPbPr), VGA (Computer Graphics), and HDMI inputs which can be scaled to 1080p in VGA/HDMI format. In addition, the built in HDMI CAT extension, microphone input, and 20 Watt amplifier makes the ASP-S123V a complete cost effective solution for education, commercial, and digital signage. Features 4 HDMI Inputs 4 VGA Inputs with 3.
User Guide Front Panel . Power indicating LED. It is illuminated red when the unit is on. . IR sensor window for remote . Input selection LEDs. . Input source selection buttons. Select video/audio source type HDMI, VGA, and Video. . Signal channel selection buttons. Selects the input specific to the selected Input source. . Resolution selection buttons. Rotates through 1024×768, 1280x720p, 1280×800, 1360×768, 1920×1080p. . MIC volume control buttons.
User Guide Rear Panel . Two RCA connectors for stereo audio output, one VGA output, one HDMI output with embedded audio, one HDBaseT for HDMI extending (Not available on –NC model). . Four VGA connectors for VGA inputs. . Four HDMI connectors for HDMI inputs. . Four 3.5mm audio connectors for VGA audio inputs. . One Component video input: Y/Pb/Pr, two composite video inputs, one S-Video input, and two pairs L/R for analog audio input. .
User Guide QUICK START Hardware • Unpack the ASP-S123V from its carton making certain everything is included. • If rack mounted find suitable space and mount using standard rack screws. • Connect all audio and video inputs and outputs accordingly. • Connect power cord. • System is ready to use.
User Guide OSD OPERATION Picture Settings The first icon from left of OSD menu is to set the picture parameter. It includes the picture mode preset, color temperature, contrast, brightness, hue, saturation, sharpness, scale, VGA setting and Advance picture adjust. Some parameters are available specific to the input type. For example: VGA setting can be set only with VGA input.
User Guide System Settings The third icon from left of OSD menu is the system setting. It includes the OSD language setting, audio listen, and freeze.
User Guide IR REMOTE Source select area, 12 channels for inputs, including: 4 HDMI 4 VGA 2 C-VIDEO 1 S-Video Line volume control area, can Menu/ work when not in MENU mode. Volume control Direction and OK buttons area, area, these buttons are available only MUTE in MENU mode. for line and MIC MIC volume control area, can audio work when not in MENU mode. mute.
User Guide FIRMWARE UPDATING The ASP-S123V supports firmware field-updating, by USB flash disk. The Operation is as follows: 1. Copy the file to a USB flash disk. 2. Plug the USB flash disk to the USB port on ASP-S123V. 3. Pressing the button “HDMI” on the front panel for 6 seconds or send the RS232 command 0698% for update mode, then press the button “OK” on the remote or send RS232 command 0609% to confirm update. The ASP-S123V will load the new firmware from USB flash disk. 4.
User Guide APPENDIX 1 Troubleshooting Problem 1. Front Panel does not work. 2. RS-232 does not have control 3. VGA has no output 4. Remote control does not operate. 5. CAT Extender is Intermittent or does not operate Solution a. Check that the power plug is properly inserted into a functioning power outlet. a. Check baud rate settings for the port b. Try swapping RX and TX. c. Make certain protocol used is correct. a.
User Guide APPENDIX 2 Communication Protocol RS-232 Control Communication protocol: Baud rate: 9600 Data bit: 8 Stop bit: 1 Pinout: 2=Rx, 3=Tx, 5=Gnd Command (ASCII) Function Description Parity bit: none 0600% MUTE Line Feedback (example) (ASCII) LINE Mute On 0601% UnMute Line LINE Mute Off 0602% Audio turn up LINE Volume: XX 0603% Audio turn down LINE Volume: XX 0604% Lock the front panel button Panel Locked 0605% 01XX% Unlock the front panel button Preset the volume.
User Guide XXXXXXXX 0633% Check the image mode Picture Mode : XX 0634% Check the audio mode Sound Mode: 0635% Check the image aspect ratio Aspect Ratio: XX 0636% Check the brightness Brightness: XX 0637% Check the contrast Contrast: XX 0638% Check the saturation Saturation: XX 0639% Check the sharpness Sharpness: XX 0640% Check the color temperature Color Temp: XX 0644% OSD CHANNEL display able 0645% Shield OSD CHANNEL OSD Source: Display OSD Channel (Source): No Display 0646%
User Guide Video Input Video Output Input 4 HDMI 4 VGA 1 YPbPr 2 C-Video 1 S-Video Output 1 HDMI 1 VGA Input Connector HDMI female connector VGA(15 pin HD), female connector RCA female connector 4 pin mini DIN connector Output Connector HDMI female connector VGA(15 pin HD), female connector Video Signal HDMI RGBHV, RGBs, RGsB, RsBsGs, NTSC 3.58, NTSC 4.42,PAL, SECAM Video Signal HDMI VGA 1080P,1920*1080 ; HD, 1360*768 720P, 1280*720; WXGA,1280*800 ; XGA, 1024*768. Bandwidth HDMI: 4.
User Guide Case Dimension W483 x H44x D235mm Product Weight 3.2Kg Specifications subject to change without notice. Composite & S-Video Supports PAL/SECAM/NTSC formats. Selectable aspect ratio. (Full-screen, wide screen, 4:3) Color RGB adjustable YPbPr Input Input Resolution Display Parameter Frame frequency Frame frequency Frame frequency 720x480I 2:1 525 15.75 60 4:3 720x480P 1:1 525 31.5 60 4:3 720x576I 2:1 625 15.625 50 4:3 720x576P 1:1 625 31.
User Guide VGA Input The VGA resolution is VESA standard, supporting: No. Resolution No. Resolution 1 720×400@70 Hz 8 1024×768@70 Hz 2 640×480@60 Hz 9 1024×768@75 Hz 3 640×480@72 Hz 10 1280×768 4 800×600@60 Hz 11 1280×1024@75 Hz 5 800×600@72 Hz 12 1360×768@60Hz 6 800×600@75 Hz 13 1920×1080 7 1024×768@60 Hz The bandwidth is up to 375MHz. Selectable aspect ratio. (Full-screen, 4:3) HDMI Input HDMI resolution support: No. Resolution No.
User Guide APPENDIX 4 Warranty Limited 3 Year Warranty Aurora Multimedia Corp. (“Manufacturer”) warrants that this product is free of defects in both materials and workmanship for a period of 3 years as defined herein for parts and labor from date of purchase. This Limited Warranty covers products purchased in the year of 2009 and after. Motorized mechanical parts (Hard Drives, DVD, etc), mechanical parts (buttons, doors, etc), remotes and cables are covered for a period of 1 year.
User Guide This page is intentionally left blank.
www.auroramultimedia.com User Guide Th Aurora Multimedia Corp.