User guide

9
User Guide
FIRMWARE UPDATING
The ASP-S123V supports firmware field-updating, by USB flash disk. The Operation is as follows:
1. Copy the file to a USB flash disk.
2. Plug the USB flash disk to the USB port on ASP-S123V.
3. Pressing the button “HDMI” on the front panel for 6 seconds or send the RS232 command 0698% for
update mode, then press the button “OK” on the remote or send RS232 command 0609% to confirm
update. The ASP-S123V will load the new firmware from USB flash disk.
4. After updating finish, reboot and send the command “0617%” to reset to factory settings.
5. After reset, reboot again.