Operating instructions

5
4
OPERATION
FIGURE 3
FIGURE 4
FIGURE 2
AUTO / ON
:
This setting allows the shredder to be automatically started by inserting paper into the
shred opening. Always feed the paper in as straight as possible. When the paper has
passed through, the shredder will automatically stop. (FIGURE 2)
OFF
:
This setting turns off all features of the shredder. For safety reasons, we recommend that
you leave the shredder in the "Off" position whenever the shredder is unattended or not
in use. (FIGURE 2)
REV
(
REVERSE
):
In the unlikely event of a paper jam, the reverse setting can be used to help clear the cutters
of paper that has not passed through. Never attempt to clear a jam by using the reverse
function until you have emptied the wastebasket. (FIGURE 2)
READY
:
The green LED light indicates the shredder in “On” and ready for use.
I
O
R
ShredSafe™ technology is an added safety feature incorporated in this
particular model. It is a new technology where the shredder is able to detect
forced entry and automatically cuts the power off, preventing further shredding.
To begin shredding, locate the switch on the unit and select the “Auto” mode (FIGURE 2). The Green
LED light indicates the shredder is “On” and ready to use. Press the designated “PUSH OPEN” area
on the handle of the cover to tilt open and expose the paper feed slot (FIGURE 3). The cover will
click into a preset position where the “SHREDDER STATUS” indication line must align
with the “READY” setting.
CONTINUED NEXT PAGE
Avoid touching the document
feed opening with hands.
Product is not intended for use by
children (product is not a toy).
Do not attempt to service this
product yourself.
Do not spray or keep any
aerosol products in or around
shredder.
Avoid loose clothing or jewelry
touching the document feed
opening.
Avoid getting hair near the
document feed opening.
WARNING
- RISK OF FIRE. Never use any petroleum based or flammable oils or lubricants in or around the
machine as some oils can combust causing serious injury.
ONLY USE NON-AEROLSOL VEGETABLE BASED OILS TO OIL YOUR CUTTERS.
- NEVER dispose of flammable chemicals or materials that have come into contact with flammable
chemicals (for example, nail polish, acetone, gasoline) in the shredder basket.
- Never shred large paper clips, envelopes (any window, insulated, or with glued
flaps), adhesive materials (labels, decals/stickers, glued paper), newsprint,
t
ransparencies, laminated documents, continuous forms, cardboard, or hard and
plastic materials (except Credit Cards).
- Do not activate reverse function while shredding credit cards.
- A socket-outlet should be near the equipment and be easily accessible.
-
Always turn the shredder off and unplug the power cord from the AC outlet before cleaning it,
moving it, or emptying the waste basket.
- Never let the wastebasket become full. This will lead to shredded material being pulled back up into
the shredder and cause jams.
- Never place the shredder near water or any heat source.
- Keep wastebasket emptied so that the shredder output is not impeded.
- Do not use the shredder if the power cord is damaged in any way.
- Do not attempt to service this product yourself as doing so may expose you to
sharp cutting blades and/or electricity and will void the manufacturers warranty.
- Never try to clean or clear the shredder blade.
- Never shred beyond the specified sheet capacity
. May result in extensive damage to the machine.