Instructions / Assembly

SETTING UP YOUR AUSSIE GRILL

Step 1. Remove the tray stand from the legs and wheels, if you have not already done so.

Step 2. Make sure the Hood/Bowl

Latch is locked.

Step 5. Raise the rear end of the Hood/Bowl. Lift Fixed Leg

up and slide Hook into bottom Bowl Bracket. Close

the Safety Latch behind the Fixed Leg Hook.

Step 3. Hold the grill vertical. Swing

the Pivot Latch away from

the crossrod.

Step 4. Lay the Grill down flat.

Step 6. Reach for the Hood Handle underneath. Rotate

Grill upward until grill is upright on floor.

Step 7. Unlock the Hood Latch. Open the Hood and remove Cooking Grid, and Ash Dump. Discard any packing materials.

Replace the Ash Dump right side up and install the Cooking Grid on the Grid Brackets.

QTY.

ITEM DESCRIPTION PART # 4200 SERIES

1 Cooking Grid 03.7000.00 1

2 Ash Dump 1040.8.001 1

3 Grid Bracket 03.6103.00 4

4 Hood Handle 03.6102.00 1

5 Bowl Handle 03.6104.00 1

6 Handle Screw, 8-18 x 1/2 03.0301.01 6

7 Cap, Tube 03.6114.00 2

8 Owners Manual 03.6081.00 1

REPLACEMENT ITEMS

Hood Latch

Pivot

Latch

Fixed Leg

Hook

Bottom Bowl

Bracket