Instruction Manual

STEP 13-ATTACH HANDLE AND HEAT INDICATOR TO HOOD - BON2A MODELS

(ITEM 44 ACTUAL SIZE)

6mm X 90mm BOLT

2 pcs

(ITEM 46) HANDLE SPACER

2 pcs

(ITEM 49) LOCKWASHER

2 pcs

(ITEM 50) 10-24 HEX NUT

2 pcs

TOOLS:

(ITEM 45) HOOD HANDLE

(ITEM 48) HEAT INDICATOR

•Insert two 6mnn x 90mm Bolts through recessed holes of Hood Handle, through Handle Spacers,

into front of hood and secure with 6mm Locknuts. Be sure to place the wide end of Spacer against

the Hood. Do not overtighten or you may crack Hood finish.

•insert Heat indicator studs into

Hood holes and secure using two

Lockwashers and two 10-24

Hexnuts. Do not overtighten or you

may crack Hood finish.

LOCKNUT

LOCKWASHER 10-24 HEX NUT